Citation: | Feixiang Guo, Hao Jiang, Hui Lü, Yanhua Yin. Improvement of Toughness of UHMWPE/PP Blends[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2019, 28(3): 667-674.doi:10.15918/j.jbit1004-0579.18055 |
[1] |
Chand N, Dwivedi U K, Sharma M K. Development and tribological behaviour of UHMWPE filled epoxy gradient composites[J]. Wear, 2007, 262(1-2):184-190.
|
[2] |
Jana S, Hinderliter B R, Zhong W H. Analytical study of tensile behaviors of UHMWPE/nano-epoxy bundle composites[J]. Journal of Materials Science, 2008, 43(12):4236-4246.
|
[3] |
Kuang T, Chang L, Fu D, et al. Improved crystallizability and processability of ultra high molecular weight polyethylene modified by poly (amido amine) dendrimers[J]. Polymer Engineering & Science, 2017, 57(2):153-160.
|
[4] |
Scheetz H A, Gilles R C. Melt processable UHMWPE:US 4281070[P]. 1981-07-28.
|
[5] |
Katsuhisa T, Aiko I, Shigeya N, et al. Effect of adding polysilane on melt-flow properties of ultrahigh molecular weight PE[J]. Journal of Applied Polymer Science, 2012, 126(S2):E403-E409.
|
[6] |
Lee E M, Oh Y S, Ha H S, et al. Rheological properties of UHMWPE/iPP blends[J]. Polymers for Advanced Technologies, 2009, 20(12):1121-1126.
|
[7] |
Xie M, Lia H. Viscosity reduction and disentanglement in ultrahigh molecular weight polyethylene melt:effect of blending with polypropylene and poly (ethylene glycol)[J]. European Polymer Journal, 2007, 43(8):3480-3487.
|
[8] |
Li N, Xiao C, Zhang Z. Effect of polyethylene glycol on the performance of ultrahigh-molecular-weight polyethylene membranes[J]. Journal of Applied Polymer Science, 2010, 117(2):720-728.
|
[9] |
Shi Ning, Han Jingjie, Ni Lizhong, et al. Preparation and rheological characterization of ultra high molecular weight polyethylene/montmorillonite nanocomposites[J]. Polymer-Plastics Technology and Engineering, 2010, 49(3):292-295.
|
[10] |
Rezaei M, Ebrahimi N G, Kontopoulou M. Surface modification of ultra-high-molecular-weight polyethylene. I. Characterization and sintering studies[J]. Journal of Applied Polymer Science, 2010, 99(5):2344-2351.
|
[11] |
Kuang T, Chang L, Chen F, et al. Facile preparation of lightweight high-strength biodegradable polymer/multi-walled carbon nanotubes nanocomposite foams for electromagnetic interference shielding[J]. Carbon, 2016, 105:305-313.
|
[12] |
Liu G, Li H. Extrusion of ultrahigh molecular weight polyethylene under ultrasonic vibration field[J]. Journal of Applied Polymer Science, 2010, 89(10):2628-2632.
|
[13] |
Lim K L K, Ishak Z A M, Ishiaku U S, et al. Highdensity polyethylene/ultrahigh-molecular-weight polyethylene blend. I. The processing, thermal, and mechanical properties[J]. Journal of Applied Polymer Science, 2010, 97(1):413-425.
|
[14] |
Vadhar P, Kyu T. Effects of mixing on morphology, rheology, and mechanical properties of blends of ultra-high molecular weight polyethylene with linear low-density polyethylene[J]. Polymer Engineering & Science, 1987, 27(3):202-210.
|
[15] |
Kyu T, Vadhar P. Cocrystallization and miscibility studies of blends of ultrahigh molecular weight polyethylene with conventional polyethylenes[J]. Journal of Applied Polymer Science, 1986, 32(6):5575-5584.
|
[16] |
Liu G, Chen Y, Li H. Study on processing of ultrahigh molecular weight polyethylene/polypropylene blends:capillary flow properties and microstructure[J]. Journal of Applied Polymer Science, 2004, 92(6):977-985.
|
[17] |
Fu Q, Wang G H. Polyethylene toughened by rigid inorganic particles[J]. Polymer Engineering & Science, 1992, 32(2):94-97.
|
[18] |
Fu Q, Wang G H, Shen J S. Polyethylene toughened by CaCO
3particle:brittle-ductile transition of CaCO
3-toughened HDPE[J]. Journal of Applied Polymer Science, 1993, 49(4):673-677.
|
[19] |
Shi X, Wang J, Cai X. Preparation and characterization of CaCO
3/high density poly[J]. International Polymer Processing, 2013, 28(2):228-235.
|
[20] |
Liang J. Impact fracture toughness and morphology of diatomite-filled polypropylene composites[J]. Polymer Engineering & Science, 2010, 49(8):1603-1607.
|
[21] |
Tam W Y, Cheung T, Li R K Y. An investigation on the impact fracture characteristics of EPR toughened polypropylene[J]. Polymer Testing, 1996, 15(4):363-380.
|
[22] |
Jiang W, Tjong S C, Li R K Y. Brittle-tough transition in PP/EPDM blends:effects of interparticle distance and tensile deformation speed[J]. Polymer, 2000, 41(9):3479-3482.
|
[23] |
Shoulberg R H, Lang E R. Stress whitening of polymer blends as a tool for experimental stress analysis[J]. Experimental Mechanics, 1962, 2(9):271-273.
|
[24] |
Kuang T, Chen F, Fu D, et al. Enhanced strength and foamability of high-density polyethylene prepared by pressure-induced flow and low-temperature crosslinking[J]. Rsc Advances, 2016, 6(41):34422-34427.
|
[25] |
Chen W, Lu F, Cheng M. Tension and compression tests of two polymers under quasi-static and dynamic loading[J]. Polymer Testing, 2002, 21(2):113-121.
|
[26] |
Norihiko Taniguchi, Tsuyoshi Nishiwaki, Hiroyuki Kawada. Tensile strength of unidirectional CFRP laminate under high strain rate[J]. Advanced Composite Materials, 2012, 16(2):167-180.
|
[27] |
Smerd R, Winkler S, Salisbury C, et al. High strain rate tensile testing of automotive aluminum alloy sheet[J]. International Journal of Impact Engineering, 2005, 32(1-4):541-560.
|