Citation: | Sufei Wang, Fujun Zhang. Simulation Research on the Effect of 2-Stroke Engine Exhaust Resonance on Aspiration[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2020, 29(3): 410-416.doi:10.15918/j.jbit1004-0579.19108 |
[1] |
Zhang Zhong, Liu Xu, Cao Jianguo. The characteristics and application of exhaust resonance system on single cylinder two-stroke gasoline engine for motorcycle [J]. Small Internal Combustion Engine and Motorcycle, 2007(2): 8-10. (in Chinese)
|
[2] |
Xie Xianzong. Introduction of reflective resonance exhaust silencer [J]. Control of Vibration and Noise, 1981(1): 37-39. (in Chinese)
|
[3] |
Xu Bin, Liu Bo, Yang Shichun, et al. Optimization analysis of an aircraft piston engine intake and exhaust system [J]. Journal of Aerospace Power, 2014, 29(3): 624-630. (in Chinese)
|
[4] |
Sammut G, Alkidas A. Relative contributions of intake and exhaust tuning on SI engine breathing: a computational study, SAE paper 2007-01-0492 [R]. Detroit: Society of Automotive Engineering, 2007.
|
[5] |
Blair G, Mackey D, Ashe M, et al. Exhaust tuning on a four-stroke engine, experimentation and simulation, SAE paper 2001-01-1797 [R]. Detroit: Society of Automotive Engineering, 2001.
|
[6] |
Zhu Yuwen. Development of automotive exhaust valve control device “KIPS” for 2-stroke engine[J]. Motorcycle Technology, 1989(S1):24-31. (in Chinese)
|
[7] |
Cartwright A, Fleck R. A detailed investigation of exhaust system design in high performance two-stroke engines, SAE Paper 942515[R]. Detroit: Society of Automotive Engineering, 1994.
|
[8] |
Schuh D, Chehroudi B. Intake port flow in a fired two-stroke engine, SAE paper 930495 [R]. Detroit: Society of Automotive Engineering, 1993.
|
[9] |
Bush P, Telford C, Boam D, et al. A design strategy for four cylinder SI automotive engine exhaust systems, SAE paper 2000-01-0913 [R]. Detroit: Society of Automotive Engineering, 2000.
|
[10] |
Huang Y, Mao H, Chang Y, et al. A study on exhaust dynamic effect of two-stroke motorcycle petrol engine, SAE paper 920421 [R]. Detroit: Society of Automotive Engineering, 1992.
|
[11] |
Ahmadi-Befrui B, Brandstatter W, Kratochwill H. Multidimensional calculation of the flow processes in a loop-scavenged two-stroke cycle engine, SAE paper 890841[R]. Detroit: Society of Automotive Engineering, 1989.
|