Citation: | Ming Zhang, Qiaomu Xu, Rong Cheng, Leijie Wang, Xin Li. Radiator Optimization Design for Planar Motors Based on Parametric Components[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2020, 29(2): 222-231.doi:10.15918/j.jbit1004-0579.20016 |
[1] |
Borrvall T, Petersson J. Topology optimization of fluids in Stokes flow [J]. International Journal for Numerical Methods in Fluids, 2003, 41(1): 77-107
|
[2] |
Olesen L H, Okkels F, Bruus H. A high-level programming-language implementation of topology optimization applied to steady-state Navier-Stokes flow [J]. International Journal for Numerical Methods in Engineering, 2006, 65(7): 975-1001
|
[3] |
Dede E M. Multiphysics topology optimization of heat transfer and fluid flow systems[C]//Proceedings of the COMSOL Users Conference, 2009.
|
[4] |
Lee K. Topology optimization of convective cooling system designs[D]. Ann Arbor, USA: University of Michigan, 2012.
|
[5] |
Scholten T C. A Practical Application of Topology Optimization for Heat Transfer and Fluid Dynamics[D]. Delft, Netherlands: Delft University of Technology, 2017.
|
[6] |
Haertel J H K, Engelbrecht K, Lazarov B S, et al. Topology optimization of a pseudo 3D thermofluid heat sink model [J]. International Journal of Heat & Mass Transfer, 2018, 121: 1073-1088
|
[7] |
Yu M, Ruan S, Wang X, et al. Topology optimization of thermal-fluid problem using the MMC-based approach [J]. Structural and Multidisciplinary Optimization, 2019, 60(1): 151-165
|
[8] |
Matsumori T, Kondoh T, Nomura T, et al. Topology optimization for fluid-thermal interaction problems under constant input power [J]. Structural & Multidisciplinary Optimization, 2013, 47(4): 571-581
|
[9] |
Yaji K, Yamada T, Yoshino M, et al. Topology optimization in thermal-fluid flow using the lattice Boltzmann method [J]. Journal of Computational Physics, 2016, 307(C): 355-377
|
[10] |
Van Oevelen T. Optimal heat sink design for liquid cooling of electronics[D]. Leuven, Belgium: University of Leuven, 2014.
|
[11] |
Smith G D. Numerical solution of partial differential equations: Finite difference methods[M]. 3rd ed. New York: Oxford University Press, 1985: 38-39.
|
[12] |
Kotcioglu I, Caliskan S, Baskasa S. Experimental study on the heat transfer and pressure drop of a cross-flow heat exchanger with different pin-fin arrays [J]. Heat and Mass Transfer, 2011, 47(9): 1133
|
[13] |
Kreisselmeier G, Steinhauser R. Systematic control design by optimizing a vector performance index[C]//Proceedings of the IFAC Symposium, 1980: 119-125.
|
[14] |
Xu S, Cai Y, Cheng G. Volume preserving nonlinear density filter based on heaviside functions [J]. Structural and Multidisciplinary Optimization, 2010, 41(4): 495-505
|
[15] |
McDevitt M R, Hitt D L, McCabe J W. Study of two-phase microslug formation in a microchannel cross junction[C]//Proceedings of the COMSOL Users Conference, 2010.
|
[16] |
Svanberg K. The method of moving asymptotes-a new method for structural optimization [J]. International Journal for Numerical Methods in Engineering, 1987, 24(2): 359-373
|