Welcome to Journal of Beijing Institute of Technology
| Citation: | Xiangdong Ni, Mingxi Bao. Dynamic Test of Hydro Mechanical Composite Transmission for Cotton Picker[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2020, 29(3): 366-378.doi:10.15918/j.jbit1004-0579.20042
|
| [1] |
Kress J. Hydrostatic power splitting transmissions for wheeled vehicles : Classification and theory of operation, SAE paper 680549[R]. Warrendale, PA, USA: Society of Automotive Engineers, 1968.
|
| [2] |
Nadykto V. Method of determining agricultural tractor’s engine power rating [J]. Machinery and Technologies of Agro-Industry, 2014(1): 7−9.
|
| [3] |
Ni X, Zhu S, Ouyan D, et al. Design and experiment of hydro-mechanical CVT speed ratio for tractor [J]. Journal of Agricultural Machinery, 2013, 44(4): 15−20.
|
| [4] |
Ni J, Hu J. Handling performance control for hybrid 8-wheel-drive vehicle and simulation verification [J]. Vehicle System Dynamics, 2016, 54(8): 1098−1119.
doi:10.1080/00423114.2016.1169303
|
| [5] |
Huang G, Luo S, Hu B, et al. Characteristics investigation for hydro-mechanical compound transmission in wind power system[C]//5th International Conference on Computing for Sustainable Energy and Environment, Chongqing, China, 2018.
|
| [6] |
Yoo Y. A strength analysis of gear train for hydro-mechanical continuously variable transmission [J]. The International Journal of Advanced Culture Technology, 2018, 6(3): 163−172.
|
| [7] |
Zhang Z, Cui H, Li R, et al. Analysis of main characteristics of hydro-mechanical continuously variable transmission[C]//5th International Conference on Mechanical Engineering, Materials and Energy, Hong Kong, China, 2016.
|
| [8] |
Zhang M, Zhou Z, Xu L. Transmission efficiency research of multi-range hydro-mechanical CVT[C]//ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Boston, MA, USA, 2016.
|
| [9] |
Zhang M, Bai D, Wang Q. Research of HMCVT speed change law based on optimal productivity[C]//AER-Advances in Engineering Research, Shenzhen, China, 2016.
|
| [10] |
Zhang M, Zhou Z, Xu L.Transmission efficiency research of multi-range hydro-mechanical CVT[C]//ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, American Society of Mechanical Engineers, 2015.
|
| [11] |
Zhang M, Guo R, Chen C. Characteristics of the hydro-mechanical continuously variable transmission in the wheeled tractor[C]//International Symposium on Vehicle, Mechanical, and Electrical Engineering, Taiwan, China, 2004.
|
| [12] |
Cheng Z, Lu Z, Qian J. A new non-geometric transmission parameter optimization design method for HMCVT based on improved GA and maximum transmission efficiency [J]. Computers and Electronics in Agriculture, 2019, 167: 105034.
doi:10.1016/j.compag.2019.105034
|
| [13] |
Wang G, Zhang X, Zhu S, et al. Dynamic simulation on shift process of tractor hydraulic power split continuously variable transmission during acceleration [J]. Transactions of the Chinese Society of Agricultural Engineering, 2016, 32(9): 30−39.
|
| [14] |
Wang G, Zhang X, Li X. Analysis of shift quality of power split continuuously variable transmission for tractor equipped with steel belt [J]. Transactions of the Chinese Society of Agricultural Engineering, 2019, 35(5): 62−72.
|
| [15] |
Xia Y, Sun D, Qin D, et al. Optimisation of the power-cycle hydro-mechanical parameters in a continuously variable transmission designed for agricultural tractors [J]. Biosystems Engineering, 2020, 193: 12−24.
doi:10.1016/j.biosystemseng.2019.11.009
|
| [16] |
Yuan S, Dong H, Li X. Analysis of lubricating performance for involute gear based on dynamic loading theory [J]. Journal of Mechanical Design, 2012, 134(12): 12100412.
|
| [17] |
Yuan S, Guo K, Hu J, et al. Study on aeration for disengaged wet clutches using a two-phase flow model [J]. Journal of Fluids Engineering, 2010, 132(11): 111304.
doi:10.1115/1.4002874
|
| [18] |
Yuan S, Peng Z, Jing C. Experimental research and mathematical model of drag torque in single-plate wet clutch [J]. Chinese Journal of Mechanical Engineering, 2011, 24(1): 91−97.
doi:10.3901/CJME.2011.01.091
|
| [19] |
Zhu Z, Long C, Zeng F. Reverse design and characteristic study of multi-range HMCVT[C]//The 2017 2nd International Seminar on Advances in Materials Science and Engineering, Singapore, 2017.
|
| [20] |
Zhu Z, Gao X, Pan D, et al. Study on the control strategy of shifting time involving multigroup clutches [J]. Mathematical Problems in Engineering, 2016(2): 1−17.
|
| [21] |
Bao M, Ni X, Wang Q, et al. Research of shift law of tractor hmcvt based on fuel economy [J]. Journal of Mechanical Transmission, 2019, 43(2): 20−25.
|
| [22] |
Hu J, Wei C. Research on the friction behaviors of two rough surfaces covered with boundary film [J]. Tribology Letters, 2014, 53(2): 487−496.
doi:10.1007/s11249-013-0288-6
|
| [23] |
Xiao M, Zhao J, Wang Y, et al. Research on system identification based on hydraulic pump-motor of HMCVT [J]. Engineering in Agriculture, Environment and Food, 2019, 12(4): 420−426.
doi:10.1016/j.eaef.2019.06.004
|
| [24] |
Hu J, Wu W, Wu M, et al. Numerical investigation of the air-oil two-phase flow inside an oil-jet lubricated ball bearing [J]. International Journal of Heat and Mass Transfer, 2014, 68: 85−93.
doi:10.1016/j.ijheatmasstransfer.2013.09.013
|
| [25] |
Macor A, Rossetti A. Optimization of hydro-mechanical power split transmissions [J]. Mechanism and Machine Theory, 2011, 46(12): 1901−1919.
doi:10.1016/j.mechmachtheory.2011.07.007
|
| [26] |
Macor A, Rossetti A. Fuel consumption reduction in urban buses by using power split transmissions [J]. Energy Conversion and Management, 2013, 71: 159−171.
doi:10.1016/j.enconman.2013.03.019
|
| [27] |
Yang S, Bao Y, Fan C. Study on characteristics of hydro-mechanical transmission in full power shift [J]. Advances in Mechanical Engineering, 2018, 10(7): 16878140187906687.
|
Figures(15)/Tables(5)
Supported by:Beijing Renhe Information Technology Co. Ltd
DownLoad:
