Citation: | Yanwen Liu, Guangyuan Jin, Jinjun Gao, Yajie Liu. Stable Fatigue Crack Propagation of 16MnR Steel[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2020, 29(4): 603-612.doi:10.15918/j.jbit1004-0579.20059 |
[1] |
Gao Z L, Zhang K D. Comparison of the fracture and fatigue properties of 16MnR steel weld metal, the HAZ and the base metal [J]. Journal of Materials Processing Technology, 1997, 63(1-3): 559−562.
doi:10.1016/S0924-0136(96)02683-0
|
[2] |
Paris P, Erdogan F. A critical analysis of crack propagation laws [J]. Journal of Fluids Engineering-Transactions of the ASME, 1963, 85(4): 528−533.
|
[3] |
Huang X P, Moan T. Improved modeling of the effect of R-ratio on crack growth rate [J]. International Journal of Fatigue, 2007, 29(4): 591−602.
doi:10.1016/j.ijfatigue.2006.07.014
|
[4] |
Dinda S, Kujawski D. Correlation and prediction of fatigue crack growth for different R-ratios using Kmax and ΔK+ parameters [J]. Engineering Fracture Mechanics, 2004, 71(12): 1779−1790.
doi:10.1016/j.engfracmech.2003.06.001
|
[5] |
Silva F S. The importance of compressive stresses on fatigue crack propagation rate [J]. International journal of Fatigue, 2005, 27(10-12): 1441−1452.
doi:10.1016/j.ijfatigue.2005.07.003
|
[6] |
Corsetti L V, Duquette D J. The effect of mean stress and environment on corrosion fatigue behavior of 7075-T6 aluminum [J]. Metallurgical Transactions, 1974, 5(5): 1087−1093.
doi:10.1007/BF02644320
|
[7] |
Gingell A D B, King J E. The effect of frequency and microstructure on corrosion fatigue crack propagation in high strength aluminium alloys [J]. Acta Materialia, 1997, 45(9): 3855−3870.
doi:10.1016/S1359-6454(97)00033-5
|
[8] |
Han Q, Wang Y, Yin Y, et al. Determination of stress intensity factor for mode I fatigue crack based on finite element analysis [J]. Engineering Fracture Mechanics, 2015, 138: 118−126.
doi:10.1016/j.engfracmech.2015.02.019
|
[9] |
Guinea G V, Planas J, Elices M. KI evaluation by the displacement extrapolation technique [J]. Engineering Fracture Mechanics, 2000, 66(3): 243−255.
doi:10.1016/S0013-7944(00)00016-3
|
[10] |
Rice J R. A path independent integral and the approximate analysis of strain concentration by notches and cracks [J]. Journal of Applied Mechanics, 1968, 35(2): 379−86.
|
[11] |
Byskov E. The calculation of stress intensity factors using the finite element method with cracked elements [J]. International Journal of Fracture Mechanics, 1970, 6(2): 159−167.
|
[12] |
Wang S S, Yau J F, Corten H T. A mixed-mode crack analysis of rectilinear anisotropic solids using conservation laws of elasticity [J]. International Journal of Fracture, 1980, 16(3): 247−259.
doi:10.1007/BF00013381
|
[13] |
Jiang Y, Hertel O, Vormwald M. An experimental evaluation of three critical plane multiaxial fatigue criteria [J]. International Journal of Fatigue, 2007, 29(8): 1490−1502.
doi:10.1016/j.ijfatigue.2006.10.028
|
[14] |
Hua C T, Socie D F. Fatigue damage in 1045 steel under constant amplitude biaxial loading [J]. Fatigue & Fracture of Engineering Materials & Structures, 1984, 7(3): 165−179.
|
[15] |
Döring R, Hoffmeyer J, Seeger T, et al. Short fatigue crack growth under nonproportional multiaxial elastic-plastic strains [J]. International Journal of Fatigue, 2006, 28(9): 972−982.
doi:10.1016/j.ijfatigue.2005.08.012
|
[16] |
Jiang Y. A fatigue criterion for general multiaxial loading [J]. Fatigue & Fracture of Engineering Materials & Structures, 1999, 23(1): 19−32.
|
[17] |
Jiang Y, Feng M. Modeling of fatigue crack propagation [J]. Journal of Engineering Materials and Technology, 2004, 126(1): 77−86.
doi:10.1115/1.1631026
|
[18] |
Ye C, Shi J, Cheng G J. An extended finite element method (XFEM) study on the effect of reinforcing particles on the crack propagation behavior in a metal-matrix composite [J]. International Journal of Fatigue, 2012, 44(9): 151−156.
|
[19] |
Sukumar N, Chopp D L, Moës N, et al. Modeling holes and inclusions by level sets in the extended finite-element method [J]. Computer methods in applied mechanics and engineering, 2001, 190(46-47): 6183−6200.
doi:10.1016/S0045-7825(01)00215-8
|
[20] |
Liu Shaolun, Ouyang Hui, Ding Chuanfu, et al. GB/T 6398–2000, Standard Test Method for Fatigue Crack Growth Rates of Metallic Material[S]. Beijing: Standards Press of China, 2000. (in Chinese).
|