Welcome to Journal of Beijing Institute of Technology
Advance Search
Volume 29Issue 4
Dec. 2020
Turn off MathJax
Article Contents
Article Navigation> JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY> 2020> 29(4): 445-455
Xinbei Lü, Jinghui Peng, Songjing Li. Dynamic Characteristics of the Jet Force on the Flapper of the Pilot Stage in a Flapper Nozzle Servo Valve Under the Flow-Solid Interaction[J]. JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2020, 29(4): 445-455. doi: 10.15918/j.jbit1004-0579.20068
Citation: Xinbei Lü, Jinghui Peng, Songjing Li. Dynamic Characteristics of the Jet Force on the Flapper of the Pilot Stage in a Flapper Nozzle Servo Valve Under the Flow-Solid Interaction[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2020, 29(4): 445-455.doi:10.15918/j.jbit1004-0579.20068
shu

Dynamic Characteristics of the Jet Force on the Flapper of the Pilot Stage in a Flapper Nozzle Servo Valve Under the Flow-Solid Interaction

doi:10.15918/j.jbit1004-0579.20068

  • Fluid Control and Automation Systems, Harbin Institute of Technology, Harbin 150001, China

Funds:the National Natural Science Foundation of China(51675119)
More Information
  • Corresponding author:professor, Ph.D. E-mail:lisongjing@hit.edu.cn
  • Received Date:2020-09-14
  • Publish Date:2020-12-30
    Abstract
  • Nowadays, more and more attention has been paid to improve the performance of the nozzle flapper servo valve. As a core part of nozzle flapper servo valve, the armature assembly is affected by electromagnetic force, jet force and feedback force at the same time. Due to the complex structure of the pilot stage flow field and the high jet pressure, the prediction of the jet force has always been difficult in modeling the transient motion of the servo valve. Whereupon, a numerical simulation method based on the flow-solid interaction(FSI) is applied to observe the variation of the jet force when the flapper is moving. Different parameters are employed to seek a suitable numerical simulation model which can balance the accuracy and computational cost. By comparing with the experiment results, the effectiveness of numerical simulation method in predicting the variation of the jet force and cavitation is verified. By this numerical simulation model, the distribution of flow field and the force on the flapper predicted by the moving and fixed flapper are compared. The results show that more dynamic details are achieved by the transient simulation. By analyzing the numerical simulation results of different inlet pressures and flapper vibration frequencies, the relationship between the movement of the flapper, the flow field distribution, the jet force and the inlet pressure is established, which provides a theoretical basis for the subsequent modeling of the armature assembly.
    • FullText(HTML)
  • loading
    • References (19)
  • [1]
    Peng J, Li S, Han H. Damping properties for vibration suppression in electrohydraulic servo-valve torque motor using magnetic fluid [J]. Applied Physics Letters, 2014, 104: 171905. doi:10.1063/1.4875029
    [2]
    Aung N Z, Li S. A numerical study of cavitation phenomenon in a flapper-nozzle pilot stage of an electrohydraulic servo-valve with an innovative flapper shape [J]. Energy Conversion and Management, 2014, 77: 31−39. doi:10.1016/j.enconman.2013.09.009
    [3]
    Zhang S, Li S. Cavity shedding dynamics in a flapper-nozzle pilot stage of an electro-hydraulic servo-valve: Experiments and numerical study [J]. Energy Conversion and Management, 2015, 100: 370−379. doi:10.1016/j.enconman.2015.04.047
    [4]
    Chen M, Xiang D, Li S, et al. Suppression of squeal noise excited by the pressure pulsation from the flapper-nozzle valve inside a hydraulic energy system [J]. Energies, 2018, 11(4): 955. doi:10.3390/en11040955
    [5]
    Nie B, Meng J, Ji Z. Numerical simulation research of liquid-solid two-phase flow in abrasive water jet nozzle [J]. Journal of Beijing Institute of Technology, 2009, 18(2): 157−161.
    [6]
    Zhu M, Zhao S, Li J, et al. Computational fluid dynamics and experimental analysis on flow rate and torques of a servo direct drive rotary control valve [J]. Mechanical Engineering Science, 2019, 233(1): 213−226. doi:10.1177/0954406218756449
    [7]
    Yang H, Wang W, Lu K. Cavitation and flow forces in the flapper-nozzle stage of a hydraulic servo-valve manipulated by continuous minijets [J]. Advances in Mechanical Engineering, 2019, 11(5): 1−9.
    [8]
    Yuan C, Song J, Liu M. Comparison of compressible and incompressible numericalmethods in simulation of a cavitating jet through a poppet valve [J]. Engineering Applications of Computational Fluid Mechanics, 2019, 13(1): 67−90. doi:10.1080/19942060.2018.1552202
    [9]
    Lu L, Long S, Zhu K. A numerical research on vortex street flow oscillation in the double flapper nozzle servo valve [J]. Processes, 2019, 7: 721. doi:10.3390/pr7100721
    [10]
    Yan H, Ren Y, Yao L, et al. Analysis of the internal characteristics of a deflector jet servo valve [J]. Chinese Journal of Mechanical Engineering, 2019, 32: 31. doi:10.1186/s10033-019-0345-7
    [11]
    Yan H, Li J, Cai C, et al. Numerical investigation of erosion wear in the hydraulic amplifier of the deflector jet servo valve [J]. Applied Sciences, 2020, 10: 1299. doi:10.3390/app10041299
    [12]
    Lu L, Xie S, Yin Y, et al. Experimental and numerical analysis on the surge instability characteristics of the vortex flow produced large vapor cavity in u-shape notch spool valve [J]. International Journal of Heat and Mass Transfer, 2020, 146: 118882. doi:10.1016/j.ijheatmasstransfer.2019.118882
    [13]
    Rao Z, Bone G M. Nonlinear modeling and control of servo pneumatic actuators [J]. IEEE Transactions on Control Systems Technology, 2008, 16(3): 562−569. doi:10.1109/TCST.2007.912127
    [14]
    Pan X, Wang G, Lu Z. Flow field simulation and a flow model of servo-valve spool valve orifice [J]. Energy Conversion and Management, 2011, 52: 3249−3256. doi:10.1016/j.enconman.2011.05.010
    [15]
    Bijan K S, Li L, Li S. CFD investigations of flow field and cavitation phenomena in the pilot stage of deflector jet servo-valve[C]//AIP Conference Proceedings, 2019, 2073: 020025.
    [16]
    Bijan K S, Li S, Lü X. Deflection flapper servo-valve: Mathematical modeling with CFD study and experimental validation [J]. Chinese Journal of Aeronautics, 2020, 1: 1−12.
    [17]
    Liu Y, Dong J, Wu S, et al. Theoretical research on the dynamic characteristics of electrohydraulic servo valve (EHSV) in deep sea environment [J]. Ocean Engineering, 2019, 192: 105957. doi:10.1016/j.oceaneng.2019.04.038
    [18]
    Wang Y, Yin Y. Performance reliability of jet pipe servo valve under random vibration environment [J]. Mechatronics, 2019, 64: 10228.
    [19]
    Zhang S. Study of the transient cavitation and induced flow phenomenon in the pilot stage of the flapper-nozzle servo-valve[D]. Harbin: Harbin Institute of Technology, 2016. (in Chinese)
    • Relative Articles
  • Supplements (0)
  • Cited By
  • 加载中

Catalog

    通讯作者:陈斌, bchen63@163.com
    • 1.

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(13)/Tables(2)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (642) PDF downloads(85) Cited by()
    Proportional views
    Related

    Address:5 Zhongguancun South Street, Haidian District, Beijing

    Tel:86-10-68914374

    Email:blgywb@bit.edu.cn

    Copy Right © Journal of Beijing Institute of Technology

    Supported by:Beijing Renhe Information Technology Co. Ltd

    /

    Return
    Return
      Baidu
      map