Citation: | LI Chang, XUE Wei, ZHANG Ting, YU Zhi-nong, JIANG Yu-rong. Effect of dual annealing upon photovoltaic properties of polymer solar cells based on poly (3-hexylthiophene)[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2015, 24(4): 534-539.doi:10.15918/j.jbit1004-0579.201524.0416 |
[1] |
Hoppe H, Sariciftci N S. Morphology of polymer/fullerene bulk heterojunction solar cells[J]. J Mater Chem, 2006,16(1):45-61.
|
[2] |
Brabec C J, Durrant J R. Solution-processed organic solar cells[J]. MRS Bull, 2008,33(7):670-675.
|
[3] |
Thompson B C, Frechet J M J. Polymer-fullerene composite solar cells[J]. Angew Chem Int Ed, 2008,47(1):58-77.
|
[4] |
Service R F. Outlook brightens for plastic solar cells[J]. Science, 2011,332(6027):293-303.
|
[5] |
Li G, Shrotriya V, Huang J, et al. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends[J]. Nat Mater, 2005,4(11):864-868.
|
[6] |
Ma W, Yang C, Gong X, et al. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology[J]. Adv Funct Mater, 2005,15(10):1617-1622.
|
[7] |
Reyes-Reyes M, Kim K, Carroll D L. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C61 blends[J]. Appl Phys Lett, 2005,87(8):083506.
|
[8] |
Tang C W. Two-layer organic photovoltaic cell[J]. Appl Phys Lett, 1986,48(2):183-185.
|
[9] |
Yu G, Heeger A J. Charge separation and photovoltaic conversion in polymer composites with internal donor/acceptor heterojunctions[J]. J Appl Phys, 1995,78(7):4510-4515.
|
[10] |
Verploegen E, Mondal R, Bettinger C J, et al. Effects of thermal annealing upon the morphology of polymer-fullerene blends[J]. Adv Funct Mater, 2010,20(20):3519-3529.
|
[11] |
Yang X, Loos J. Toward high-performance polymer solar cells: the importance of morphology control[J]. Macromolecules, 2007,40(5):1353-1362.
|
[12] |
Li G, Yao Y, Yang H, et al. "Solvent annealing" effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes[J]. Adv Funct Mater, 2007,17(10):1636-1644.
|
[13] |
Bertho S, Janssen G, Cleij T J, et al. Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer:fullerene solar cells[J]. Sol Energy Mater Sol Cells, 2008,92(7):753-760.
|
[14] |
Kim Y, Choulis S A, Nelson J, et al. Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene[J]. Appl Phys Lett, 2005,86(6):063502.
|
[15] |
Al-Ibrahim M, Ambacher O, Sensfuss S, et al. Effects of solvent and annealing on the improved performance of solar cells based on poly(3-hexylthiophene):fullerene[J]. Appl Phys Lett, 2005,86(20):201120.
|
[16] |
Miller S, Fanchini G, Lin Y Y, et al. Investigation of nanoscale morphological changes in organic photovoltaics during solvent vapor annealing[J]. J Mater Chem, 2008,18(3),306-312.
|
[17] |
Verploegen E, Miller C E, Schmidt K, et al. Manipulating the morphology of P3HT-PCBM bulk heterojunction blends with solvent vapor annealing[J]. Chem Mater, 2012,24(20),3923-3931.
|
[18] |
Campoy-Quiles M, Ferenczi T, Agostinelli T, et al. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends[J]. Nat Mater, 2008,7(2):158-164.
|
[19] |
Vogelsang J, Brazard J, Adachi T, et al. Watching the annealing process one polymer chain at a time[J]. Angew Chem Int Ed, 2011,50(10):2257-2261.
|
[20] |
Zhang T, Deng Y, Johnson S, et al. Highly efficient blue polyfluorene-based polymer light-emitting diodes through solvent vapour annealing[J]. J Phys D Appl Phys, 2009,42(14):145104.
|
[21] |
Tang H W, Lu G H, Li L G, et al. Precise construction of PCBM aggregates for polymer solar cells via multi-step controlled solvent vapor annealing[J]. J Mater Chem, 2010,20(4):683-688.
|
[22] |
Savenije T J, Kroeze J E, Yang X N, et al. The effect of thermal treatment on the morphology and charge carrier dynamics in a polythiophene-fullerene bulk heterojunction[J]. Adv Funct Mater, 2005,15(8):1260-1266.
|
[23] |
Zhao Y, Guo X Y, Xie Z Y, et al. Solvent vapor-induced self assembly and its influence on optoelectronic conversion of poly(3-hexylthiophene):methanofullerene bulk heterojunction photovoltaic cells[J]. J Appl Polym Sci, 2009,111(4):1799-1804.
|
[24] |
Li Chang, Zhang Ting, Xue Wei. Enhancement of polymer crystallinity in high performance poly(3-hexylthiophene)-based solar cells via solvent vapor pretreatment-assisted thermal annealing[J]. Chinese Journal of Luminescence, 2014, 35(2):202-206. (in Chinese)
|
[25] |
Yoshino K, Yin X H, Morita S, et al. Enhanced photoconductivity of C60 doped poly(3-alkylthiophene)[J]. Solid State Commun, 1993,85(2):85-88.
|
[26] |
Kittichungchit V, Hori T, Moritou H, et al. Effect of solvent vapor treatment on photovoltaic properties of conducting polymer/C60 interpenetrating heterojunction structured organic solar cell[J]. Thin Solid Films, 2009,518(2):518-521.
|
[27] |
Kawano K, Sakai J, Yahiro M, et al. Effect of solvent on fabrication of active layers in organic solar cells based on poly(3-hexylthiophene) and fullerene derivatives[J]. Sol Energy Mater Sol Cells, 2009,93(4):514-518.
|
[28] |
Yang F, Shtein M, Forrest S R, Controlled growth of a molecular bulk heterojunction photovoltaic cell[J]. Nat Mater, 2005,4(1):37-41.
|
[29] |
Wu Z W, Song T, Jin Y Z, et al. High performance solar cell based on ultra-thin poly(3-hexylthiophene):fullerene film without thermal and solvent annealing[J]. Appl Phys Lett, 2011,99(14):143306.
|
[30] |
Chu C W, Yang H, Hou W J, et al. Control of the nanoscale crystallinity and phase separation in polymer solar cells[J]. Appl Phys Lett, 2008,92(10):103306.
|
[31] |
Brinkmann M, Wittmann J C. Orientation of regioregular poly(3-hexylthiophene) by directional solidification: a simple method to reveal the semicrystalline structure of a conjugated polymer[J]. Adv Mater, 2006,18(7):860-863.
|