Citation: | YANG Hui, MAI Lü-bo, LU Can-hua, TONG Yi, WANG Zhi-tao, ZHANG Feng-ling, HUANG Feng-lei. Dimensional analysis of the impact toughness test for synthetic diamond grits[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2016, 25(1): 1-6.doi:10.15918/j.jbit1004-0579.201625.0101 |
[1] |
Kaner R B, Gilman J J, Tolbert S H. Designing superhard materials[J]. Science, 2005, 308(5726):1268-1269.
|
[2] |
Field J E. The properties of natural and synthetic diamond[M]. London:Academic Press, 1992.
|
[3] |
Zhang Shaohe. Diamond and diamond tools[M]. Changsha:Central South University Press, 2005.(in Chinese)
|
[4] |
Brookes E J, Greenwood P, Xing G. Friction and wear of synthetic diamond[J]. International Journal of Refractory Metals and Hard Materials, 1999, 17(1):69-77.
|
[5] |
Belling N G, Bialy L. Friatester-10 years later[J]. Industrial Diamond Review, 1974(8):285-291.
|
[6] |
Tian Songqiao, Zhang Junxiang. Impact toughness test method and machine CYCJ-91A of super-abrasive[J]. Diamond & Abrasives Engineering, 1994(2):31-32.
|
[7] |
Fang Jianfeng, Zhang Jinyuan, Jin Chenghai, et al. Research on the relationship between impact strength and inclusion content in synthetic diamond[J].Diamond & Abrasives Engineering, 2001(2):24-25.
|
[8] |
Zhang Baofa, Zhou Zhihua, Liu Gangping. Some problems concerned during impact toughness test[J]. Superhard Material Engineering, 2006(5):18-20.
|
[9] |
Sun Peiqin, Li Wenyuan. Research on the test method and standard for the toughness index Ti, the thermal toughness TTi and the magnetic susceptibility x0[C]//China Machine Tool & Tool Builders' Association. 8th Chinese Superhard Materials & Related Products Conference Proceedings, Suzhou, 2008:81-84.
|
[10] |
Zang Jianbing, Wang Huanxin. Classification and characteristics for diamond samples after impact test[J]. Diamond & Abrasives Engineering, 2001(6):9-11.
|
[11] |
Zhang Pingzhan, Zhang Zupei. Analysis on dynamic load resistance measurement for diamond grain strength[J]. Diamond & Abrasives Engineering, 1991(2):35-39.
|
[12] |
Snyder S R, Raftery T. Polycrystalline diamond cutters with enhanced impact resistance:U.S. Patent 20,030,217,869[P]. 2003-11-27.
|
[13] |
Tan Qingming. Dimensional analysis[M]. Hefei:China Science and Technology University Press, 2005.(in Chinese)
|
[14] |
FEPA standard for measuring the relative strengths of saw diamond grits[S]. Paris:Federation of European Producers of Abrasives, Edition 1, 1994.
|