Welcome to Journal of Beijing Institute of Technology
Advance Search
Volume 25Issue 1
.
Turn off MathJax
Article Contents
Article Navigation> JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY> 2016> 25(1): 56-63
MA Fu-kang, ZHAO Chang-lu, ZHANG Fu-jun, ZHAO Zhen-feng, LIU Ying. Mixture formation analysis of an opposed-piston two-stroke gasoline-direct-injection engine[J]. JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2016, 25(1): 56-63. doi: 10.15918/j.jbit1004-0579.201625.0109
Citation: MA Fu-kang, ZHAO Chang-lu, ZHANG Fu-jun, ZHAO Zhen-feng, LIU Ying. Mixture formation analysis of an opposed-piston two-stroke gasoline-direct-injection engine[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2016, 25(1): 56-63.doi:10.15918/j.jbit1004-0579.201625.0109
shu

Mixture formation analysis of an opposed-piston two-stroke gasoline-direct-injection engine

doi:10.15918/j.jbit1004-0579.201625.0109
  • 1.

    School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China;School of Mechanical and Power Engineering, North University of China, Taiyuan 030051, China

  • 2.

    School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China

  • Received Date:2014-09-20
    Abstract
  • The effects of different flow forms on an opposed-piston two-stroke (OPTS) gasoline-direct-injection (GDI) engine was studied by analyzing the mixture formation and combustion. Swirl was broken and dissipated gradually and the turbulence kinetic energy (TKE) was small in the compression process; however, tumble was strengthened and the TKE was strong in the compression process. For swirl around Xaxis (the axis of cylinder) and tumble around Yaxis (the vertical direction of injector), droplets were attached to the cylinder liner by the centrifugal force and the mixture distribution was poor. For tumble around Zaxis (the direction of injector), the wall film in cylinder liner was thin and mixture distribution was homogeneous. Results showed that since the injector were installed on the wall of the cylinder liner in the OPTS-GDI engine, the spray angle was small and the mixture formation time was short. The 45° oblique axis tumble ratio of 1 was reasonable for the mixture formation and combustion for an OPTS-GDI engine.
    • FullText(HTML)
  • loading
    • References (13)
  • [1]
    Huang Zuohua. R & D current situation and frontier for energy-saving and clean utilization in internal combustion engine[J]. Journal of Automotive Safety and Energy, 2010, 1(2):89-97. (in Chinese)
    [2]
    Hirohisa Ogawa, Masato Matsuki, Takahiro Eguchi Ogawa. Development of a power train for the hybrid automobile-the Honda Civic[R]. Detroit, USA:Detroit Diesel Corporation, 2003.
    [3]
    Tate E D. The electrification of the automobile:from conventional hybrid, to plug-in hybrids, to extended-range electric vehicles[J]. SAE Int J Passeng Cars-Electron Electr Syst, 2009, 1(1):156-166.
    [4]
    Zhou Su, Niu Jigao, Chen Fengxiang, et al. A study on powertrain design and simulation for range-extended electric vehicle[J]. Automotive Engineering, 2011, 33(11):924-929. (in Chinese)
    [5]
    Yi Yong, De Minco Christopher M. Numerical investigation of mixture preparation in a GDI engine, SAE paper, 2006-01-3375[R]. Warrendale, PA, USA:Society of Automotive Engineering,2006.
    [6]
    Liu Guoqing, Shu Gequn, Zhu Hang. Effect of tumble and squish on combustion characteristic and performance of GDI engine[J]. Transactions of CSICE, 2011, 29(4):307-312. (in Chinese)
    [7]
    Han Wenyan. Numerical simulation of mixture formation process for GDI engine based on the injector characteristics[J]. Combustion Engines, 2012(6):15-19. (in Chinese)
    [8]
    Wang Yanhua, Yang Shichun, Gao Feng, et al. Spray break-up model establishment and experiment of multi-hole injector on gasoline direct injection engine[J]. Transactions of the Chinese Society for Agricultural Machinery, 2013, 44(3):12-16. (in Chinese)
    [9]
    Ranasinghe J, Cant S. A turbulent combustion model for a stratified charged, spark ignited internal combustion engine, SAE paper, 2000-01-0275[R]. Warrendale, PA, USA:Society of Automotive Engineering, 2000.
    [10]
    Xu Hanjun, Song Jinou, Yao Chunde, et al. Simulation on in-cylinder flow on mixture formation and combustion in OPOC engine[J]. Transactions of CSICE, 2009, 27(5):395-400. (in Chinese)
    [11]
    Krishna B M, Mallikarjuna J M. Effect of intake manifold orientation on in-cylinder tumble flow structure in an internal combustion engine-an analysis using particle image velocimetry[J]. Journal of Applied Fluid Mechanics, 2011, 4(1):1-14.
    [12]
    Ye Yisu, Wang Weimin, Wang Zhaowen. The development and improvement of combustion system in a GDI engine based on simulation[J]. Automotive Engineering, 2011, 33(10):838-844. (in Chinese)
    [13]
    Hofbauer P. Opposed piston opposed cylinder (opoc) engine for military ground vehicles, SAE paper, 2005-01-1548[R]. Warrendale, PA, USA:Society of Automotive Engineering, 2005.
    • Relative Articles
  • Supplements (0)
  • Cited By
  • 加载中

Catalog

    通讯作者:陈斌, bchen63@163.com
    • 1.

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (601) PDF downloads(733) Cited by()
    Proportional views
    Related

    Address:5 Zhongguancun South Street, Haidian District, Beijing

    Tel:86-10-68914374

    Email:blgywb@bit.edu.cn

    Copy Right © Journal of Beijing Institute of Technology

    Supported by:Beijing Renhe Information Technology Co. Ltd

    /

      Return
      Return
        Baidu
        map