Welcome to Journal of Beijing Institute of Technology
Advance Search
Volume 26Issue 1
.
Turn off MathJax
Article Contents
Article Navigation> JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY> 2017> 26(1): 50-57
Delin Sun, Ridong Liao, Dexing Qian, Zhengkun Cheng. Parameter Identification Based on Force-Displacement Curves for a Bolted Joint Finite Element Model[J]. JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2017, 26(1): 50-57. doi: 10.15918/j.jbit1004-0579.201726.0108
Citation: Delin Sun, Ridong Liao, Dexing Qian, Zhengkun Cheng. Parameter Identification Based on Force-Displacement Curves for a Bolted Joint Finite Element Model[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2017, 26(1): 50-57.doi:10.15918/j.jbit1004-0579.201726.0108
shu

Parameter Identification Based on Force-Displacement Curves for a Bolted Joint Finite Element Model

doi:10.15918/j.jbit1004-0579.201726.0108

  • School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China

  • Received Date:2015-01-20
    Abstract
  • In order to identify the uncertain parameters of a bolted joint finite element model, a simple and applicable way of parameter identification is introduced. By utilizing numerical simulation with the Abaqus software and experimental investigation with the MTS material testing system, the tangential force-displacement curves that reflect the characteristics of the bolted joint were acquired. On the basis of this, by employing the response surface methodology (RSM) and genetic algorithms (GAs), parameters in the FEM model were identified. The force-displacement curves by both virtual and experimental approaches are well correlated at the end. This phenomenon-based parameter identification method may help facilitate precise prediction of complex jointed connection structures.
    • FullText(HTML)
  • loading
    • References (19)
  • [1]
    Kim J, Yoon J, Kang B. Finite element analysis and modeling of structure with bolted joints[J]. Applied Mathematical Modelling, 2007, 31(5):895-911.
    [2]
    Caignot A, Ladevèze P, Néron D, et al. Virtual testing for the prediction of damping in joints[J]. Engineering Computations, 2010, 27(5):621-644.
    [3]
    Schwingshackl C W, Petrov E P,Ewins D J. Measured and estimated friction interface parameters in a nonlinear dynamic analysis[J]. Mechanical Systems and Signal Processing, 2012, 28:574-584.
    [4]
    Gaul L, Lenz J. Nonlinear dynamics of structures assembled by bolted joints[J]. Acta Mechanica, 1997, 125(1):169-181.
    [5]
    Lampaert V, Al-Bender F,Swevers J. Experimental characterization of dry friction at low velocities on a developed tribometer setup for macroscopic measurements[J]. Tribology Letters, 2004, 16(1):95-105.
    [6]
    Luan B,Robbins M O. The breakdown of continuum models for mechanical contacts[J]. Nature, 2005, 435(7044):929-932.
    [7]
    Eriten M, Polycarpou A A,Bergman L A. A physics-based friction model and integration to a simple dynamical system[J]. Journal of Vibration and Acoustics, 2012, 134(5):051012-051012.
    [8]
    Wriggers P,Laursen T A. Computational contact mechanics[M]. Berlin:Springer, 2006.
    [9]
    Abaqus-Inc. Abaqus user manual[M]. Version 6.10. Providence, RI, USA:Dassault Systems Simulia Corp, 2010.
    [10]
    Bickford J. Handbook of bolts and bolted joints[M]. New York:CRC Press, 1998.
    [11]
    Bas D,Boyacı I · H. Modeling and optimization I:usability of response surface methodology[J]. Journal of Food Engineering, 2007, 78(3):836-845.
    [12]
    Bezerra M A, Santelli R E, Oliveira E P, et al. Response surface methodology (RSM) as a tool for optimization in analytical chemistry[J]. Talanta, 2008, 76(5):965-977.
    [13]
    Hasanien H M, Abd-Rabou A S,Sakr S M. Design optimization of transverse flux linear motor for weight reduction and performance improvement using response surface methodology and genetic algorithms[J]. Energy conversion, IEEE Transactions, 2010, 25(3):598-605.
    [14]
    Mohan S C,Maiti D K. Structural optimization of rotating disk using response surface equation and genetic algorithm[J]. International Journal for Computational Methods in Engineering Science and Mechanics, 2013, 14(2):124-132.
    [15]
    Wang H, Hong H, Li J,Rui Q. Study on multi-objective optimization of airbag landing attenuation system for heavy airdrop[J]. Defence Technology, 2013, 9(4):237-241.
    [16]
    Park J. Optimal Latin-hypercube designs for computer experiments[J]. Journal of Statistical Planning and Inference, 1994, 39(1):95-111.
    [17]
    Husslage B G M, Rennen G, van Dam E R, et al. Space-filling Latin hypercube designs for computer experiments[J]. Optimization and Engineering, 2011, 12(4):611-630.
    [18]
    Koza J, Poli R. Genetic programming[M].New York:Springer US, 2005.
    [19]
    Van der Velden A,Koch P. Isight design optimization methodologies[M]. Ohio:ASM Handbook, 2010.
    • Relative Articles
  • Supplements (0)
  • Cited By
  • 加载中

Catalog

    通讯作者:陈斌, bchen63@163.com
    • 1.

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (640) PDF downloads(913) Cited by()
    Proportional views
    Related

    Address:5 Zhongguancun South Street, Haidian District, Beijing

    Tel:86-10-68914374

    Email:blgywb@bit.edu.cn

    Copy Right © Journal of Beijing Institute of Technology

    Supported by:Beijing Renhe Information Technology Co. Ltd

    /

      Return
      Return
        Baidu
        map