Welcome to Journal of Beijing Institute of Technology
Advance Search
Volume 27Issue 1
.
Turn off MathJax
Article Contents
Article Navigation> JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY> 2018> 27(1): 155-160
Jian Wang, Ziran Du, Tong Lian, Jiong Peng. Mechanical Performances and Morphology of LDPE/UHMWPE Single-Polymer Composites Produced by Extrusion-Calendering Method[J]. JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2018, 27(1): 155-160. doi: 10.15918/j.jbit1004-0579.201827.0119
Citation: Jian Wang, Ziran Du, Tong Lian, Jiong Peng. Mechanical Performances and Morphology of LDPE/UHMWPE Single-Polymer Composites Produced by Extrusion-Calendering Method[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2018, 27(1): 155-160.doi:10.15918/j.jbit1004-0579.201827.0119
shu

Mechanical Performances and Morphology of LDPE/UHMWPE Single-Polymer Composites Produced by Extrusion-Calendering Method

doi:10.15918/j.jbit1004-0579.201827.0119

  • School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing 100081, China

  • Received Date:2016-12-05
    Abstract
  • Extrusion-calendering method was developed to prepare single-polymer composites (SPCs) of ultra-high molecular weight polyethylene (UHMWPE) fabric reinforcing low density polyethylene (LDPE). Differential scanning calorimeter (DSC) experiments were executed to determine the setup of extrusion temperature. Effects of the die temperature on the tensile and interfacial performances of SPCs were studied through the tensile and T-peel tests, respectively. The results showed that both tensile strength and modulus increased initially and decreased afterwards as the temperature increased. The peak values of tensile strength and modulus of PE SPCs, which are 10.8 and 3.5 times as high as those of the unreinforced LDPE respectively, were obtained at 150.℃. Higher temperatures also give a positive effect on peel strength. Scanning electron microscopy (SEM) and camera were also used to observe the morphology of the SPCs samples.
    • FullText(HTML)
  • loading
    • References (12)
  • [1]
    Matabola K P, De Vries A R, Moolman F S, et al. Single polymer composites:a review[J]. Journal of Materials Science, 2009,44(23):6213-6222.
    [2]
    Ryan M, Debes B, Stoyko F. Effect of reinforcement orientation on the mechanical properties of microfibrillar PP/PET and PET single-polymer composites[J]. Macromolecular Materials and Engineering, 2012,297(7):711-723.
    [3]
    Capitai N J,Porter R S. The concept of one polymer composites modeled with high density polyethylene[J]. Journal of Materials Science, 1975,10(10): 1671-1677.
    [4]
    Hine P J, Olley R H, Ward I M. The use of interleaved films for optimising the production and properties of hot compacted, self-reinforced polymer composites[J]. Composites Science and Technology, 2008,68(6):1413-1421.
    [5]
    Jordan N D, Olley R H, Bassett D C, et al. The development of morphology during hot compaction of Tensylon high-modulus polyethylene tapes and woven cloths[J]. Polymer, 2002,43(12):3397-3404.
    [6]
    Hine P J, Unwin A P, Ward I M. The use of an interleaved film for optimising the properties of hot compacted polyethylene single polymer composites[J]. Polymer, 2011,52(13):2891-2898.
    [7]
    Ratner S, Weinberg A, Marom G. Morphology and mechanical properties of cross-linked PE/PE composite materials[J]. Polymer Composites, 2003,24(3):422-477.
    [8]
    Jordan N D, Bassett D C, Olley R H, et al. The hot compaction behaviour of woven oriented polypropylene fibres and tapes. Ⅱ. Morphology of cloths before and after compaction[J]. Polymer, 2003,44(4):1133-1143.
    [9]
    Barkoula N M, Peijs T, Schimanski T, et al. Processing of single polymer composites using the concept of constrained fibers[J]. Polymer Composites, 2005,26(1):114-120.
    [10]
    Wang J,Chen J,Dai P,et al. Properties of polypropylene single-polymer composites produced by the undercooling melt film stacking method[J]. Composites Science and Technology, 2015, 107(11): 82-88.
    [11]
    Gong Y, Liu A, Yang G. Polyamide single polymer composites prepared via in situ anionic polymerization of ε-caprolactam[J]. Composites Part A:Applied Science and Manufacturing, 2010, 41(8): 1006-1011.
    [12]
    Alcock B,Cabrera N O, Barkoula N M,et al. Interfacial properties of highly oriented coextruded polypropylene tapes for the creation of recyclable allpolypropylene composites[J]. Journal of Applied Polymer Science, 2007,104(1):118-129.
    • Relative Articles
  • Supplements (0)
  • Cited By
  • 加载中

Catalog

    通讯作者:陈斌, bchen63@163.com
    • 1.

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (691) PDF downloads(678) Cited by()
    Proportional views
    Related

    Address:5 Zhongguancun South Street, Haidian District, Beijing

    Tel:86-10-68914374

    Email:blgywb@bit.edu.cn

    Copy Right © Journal of Beijing Institute of Technology

    Supported by:Beijing Renhe Information Technology Co. Ltd

    /

      Return
      Return
        Baidu
        map