Welcome to Journal of Beijing Institute of Technology
Advance Search
Volume 31Issue 2
Apr. 2022
Turn off MathJax
Article Contents
Article Navigation> JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY> 2022> 31(2): 131-139
Shaogang Liu, Long Yin, Wei Yin, Yuzhen Zhang, Chao Zuo. Single-Shot 360-Degree Cranial Deformity Detection System Using Digital Image Correlation[J]. JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2022, 31(2): 131-139. doi: 10.15918/j.jbit1004-0579.2021.104
Citation: Shaogang Liu, Long Yin, Wei Yin, Yuzhen Zhang, Chao Zuo. Single-Shot 360-Degree Cranial Deformity Detection System Using Digital Image Correlation[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2022, 31(2): 131-139.doi:10.15918/j.jbit1004-0579.2021.104
shu

Single-Shot 360-Degree Cranial Deformity Detection System Using Digital Image Correlation

doi:10.15918/j.jbit1004-0579.2021.104
  • 1.

    School of Electronic and Optical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China

  • 2.

    Jiangsu Key Laboratory of Spectral Imaging & Intelligent Sense, Nanjing 210094, China

  • 3.

    Smart Computational Imaging Laboratory (SCILab), Nanjing University of Science and Technology, Nanjing 210094, China

  • 4.

    Smart Computational Imaging Research Institute (SCIRI) of NanjingUniversity of Science and Technology, Nanjing 210019, China

Funds:This work was supported by the National Natural Science Foundation of China (No. 62075096), Leading Technology of Jiangsu Basic Research Plan (No. BK20192003), National Defense Science and Technology Foundation of China (No. 2019-JCJQ-JJ-381), “333 Engineering” Research Project of Jiangsu Province (No. BRA2016407), Jiangsu Provincial “One Belt and One Road” Innovation Cooperation Project (No. BZ2020007), Fundamental Research Funds for the Central Universities (Nos. 30921011208, 30919011222 and 30920032101) and Open Research Fund of Jiangsu Key Laboratory of Spectral Imaging & Intelligent Sense (No. JSGP202105).
More Information
  • Author Bio:

    Shaogang Liuis currently pursuing a master’s degree in Instrumentation Engineering at Nanjing University of Science and Technology. His research interest is mainly focused on optical 3D measurement

    Long Yinis currently pursuing his B.E. degree in Opto-Electronic Information Science and Engineering at Nanjing University of Science and Technology. His research interest is mainly focused on optical 3D measurement

    Wei Yinjoined the School of Electronic and Optical Engineering at Nanjing University of Science and Technology as a postdoctoral researcher in 2022. His research interests include high-speed 3D measurement based on fringe projection, fast real-time 3D measurement based on speckle projection, stereo vision, and deep learning

    Yuzhen Zhanghas been an associate professor at Nanjing University of Science and Technology since 2003. Her research interests include dynamic optical 3D measurement, image processing, and other directions

    Chao Zuohas been a professor and doctoral supervisor at Nanjing University of Science and Technology since 2017. His research interests include optical metrology, digital holography, and quantitative phase imaging

  • Corresponding author:zyz_1973@njust.edu.cn
  • Received Date:2021-12-31
  • Rev Recd Date:2022-02-14
  • Accepted Date:2022-02-18
  • Publish Date:2022-04-26
    Abstract
  • In this paper, a single-shot 360-degree cranial deformity detection system using digital image correlation (DIC) is presented to quickly obtain and detect accurate 3D data of infants’ cranium. By introducing plane mirrors into a stereo 3D DIC measurement system, a multi-view 3D imaging model is established to convert 3D data from real and virtual perspectives into 360-degree 3D data of the tested infant cranium, achieving single-shot and panoramic 3D measurement. Experimental results showed that the performance and measurement accuracy of the proposed system can meet the requirements for cranial deformity detection, which provides a fast, accurate, and low-cost solution medically.
    • 共同第一作者
    FullText(HTML)
  • loading
    • References (28)
  • [1]
    L. C. Argenta, L. R. David, J. A. Wilson, and W. O. Bell,“An increase in infant cranial deformity with supine sleeping position,” The Journal of Craniofacial Surgery, vol. 7, no. 1, pp. 5-11, 1996. doi:10.1097/00001665-199601000-00005
    [2]
    J. Nuysink, M. J. Eijsermans, I. C. van Haastert, C. Koopman-Esseboom, P. J. Helders, L. S. de Vries, and J. van der Net,“Clinical course of asymmetric motor performance and deformational plagiocephaly in very preterm infants,” The Journal of Pediatrics, vol. 163, no. 3, pp. 658-665, 2013. doi:10.1016/j.jpeds.2013.04.015
    [3]
    P. Meyer-Marcotty, F. Kunz, T. Schweitzer, B. Wachter, H. Böhm, N. Waßmuth, and C. Linz,“Cranial growth in infants- a longitudinal three-dimensional analysis of the first months of life,” Journal of Cranio-Maxillofacial Surgery, vol. 46, no. 6, pp. 987-993, 2018. doi:10.1016/j.jcms.2018.04.009
    [4]
    M. Zonenshayn, E. Kronberg, and M. M. Souweidane,“Cranial index of symmetry: an objective semiautomated measure of plagiocephaly,” Journal of Neurosurgery: Pediatrics, vol. 100, no. 5, pp. 537-540, 2004. doi:10.3171/ped.2004.100.5.0537
    [5]
    Y. Aihara, K. Komatsu, H. Dairoku, O. Kubo, T. Hori, and Y. Okada,“Cranial molding helmet therapy and establishment of practical criteria for management in Asian infant positional head deformity,” Child’s Nervous System, vol. 30, no. 9, pp. 1499-1509, 2014. doi:10.1007/s00381-014-2471-y
    [6]
    L. G. Branch, K. Kesty, E. Krebs, L. Wright, S. Leger, and L. R. David,“Deformational plagiocephaly and craniosynostosis: trends in diagnosis and treatment after the ‘back to sleep’ campaign,” Journal of Craniofacial Surgery, vol. 26, no. 1, pp. 147-150, 2015. doi:10.1097/SCS.0000000000001401
    [7]
    A. Binkiewicz-Glińska, A. Mianowska, M. Sokołów, A. Reńska, K. Ruckeman-Dziurdzińska, S. Bakuła, and E. Kozłowska,“Early diagnosis and treatment of children with skull deformations. the challenge of modern medicine,” Dev Period Med, vol. 20, no. 4, pp. 289-295, 2016.
    [8]
    J. P. Steinberg, R. Rawlani, L. S. Humphries, V. Rawlani, and F. A. Vicari,“Effectiveness of conservative therapy and helmet therapy for positional cranial deformation,” Plastic and Reconstructive Surgery, vol. 135, no. 3, pp. 833-842, 2015. doi:10.1097/PRS.0000000000000955
    [9]
    T. Graham, B. Adams-Huet, N. Gilbert, K. Witthoff, T. Gregory, and M. Walsh,“Effects of initial age and severity on cranial remolding orthotic treatment for infants with deformational plagiocephaly,” Journal of Clinical Medicine, vol. 8, no. 8, pp. 1097, 2019. doi:10.3390/jcm8081097
    [10]
    F. Kunz, T. Schweitzer, J. Kunz, N. Waßmuth, A. Stellzig-Eisenhauer, H. Böhm, P. Meyer-Marcotty, and C. Linz,“Head orthosis therapy in positional plagiocephaly: Influence of age and severity of asymmetry on effect and duration of therapy,” Plastic and Reconstructive Surgery, vol. 140, no. 2, pp. 349-358, 2017. doi:10.1097/PRS.0000000000003517
    [11]
    J. P. Stolovitzky and N. W. Todd,“Head shape and abnormal appearance of tympanic membranes,” Otolaryngology—Head and Neck Surgery, vol. 102, no. 4, pp. 322-325, 1990. doi:10.1177/019459989010200403
    [12]
    A. Katsumata, M. Fujishita, M. Maeda, Y. Ariji, E. Ariji, and R. P. Langlais,“3D-CT evaluation of facial asymmetry,” Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, vol. 99, no. 2, pp. 212-220, 2005. doi:10.1016/j.tripleo.2004.06.072
    [13]
    L. A. Fox, M. W. Vannier, O. C. West, A. J. Wilson, G. A. Baran, and T. K. Pilgram,“Diagnostic performance of CT, MPR and 3DCT imaging in maxillofacial trauma,” Computerized Medical Imaging and Graphics, vol. 19, no. 5, pp. 385-395, 1995. doi:10.1016/0895-6111(95)00022-4
    [14]
    E. Bo, X. Ge, Y. Luo, X. Wu, S. Chen, H. Liang, S. Chen, X. Yu, P. Shum, and J. Mo,“Cellular-resolution in vivo tomography in turbid tissue through digital aberration correction,” PhotoniX, vol. 1, no. 1, pp. 1-12, 2020. doi:10.1186/s43074-020-00006-w
    [15]
    S. S. Gorthi and P. Rastogi,“Fringe projection techniques: whither we are?,” Optics and Lasers in Engineering, vol. 48, pp. 133-140, 2010. doi:10.1016/j.optlaseng.2009.09.001
    [16]
    C. Zuo, S. Feng, L. Huang, T. Tao, W. Yin, and Q. Chen,“Phase shifting algorithms for fringe projection profilometry: A review,” Optics and Lasers in Engineering, vol. 109, pp. 23-59, 2018. doi:10.1016/j.optlaseng.2018.04.019
    [17]
    W. Yin, S. Feng, T. Tao, L. Huang, M. Trusiak, Q. Chen, and C. Zuo,“High-speed 3D shape measurement using the optimized composite fringe patterns and stereo-assisted structured light system,” Optics Express, vol. 27, no. 3, pp. 2411-2431, 2019. doi:10.1364/OE.27.002411
    [18]
    W. Yin, C. Zuo, S. Feng, T. Tao, Y. Hu, L. Huang, J. Ma, and Q. Chen,“High-speed three-dimensional shape measurement using geometry-constraint-based number-theoretical phase unwrapping,” Optics and Lasers in Engineering, vol. 115, pp. 21-31, 2019. doi:10.1016/j.optlaseng.2018.11.006
    [19]
    Y. Dong and B. Pan,“A review of speckle pattern fabrication and assessment for digital image correlation,” Experimental Mechanics, vol. 57, no. 8, pp. 1161-1181, 2017. doi:10.1007/s11340-017-0283-1
    [20]
    G. Bomarito, J. Hochhalter, and T. Ruggles,“Development of optimal multiscale patterns for digital image correlation via local grayscale variation,” Experimental Mechanics, vol. 58, no. 7, pp. 1169-1180, 2018. doi:10.1007/s11340-017-0348-1
    [21]
    B. Pan,“Digital image correlation for surface deformation measurement: Historical developments, recent advances and future goals,” Measurement Science and Technology, vol. 29, no. 8, pp. 082001, 2018. doi:10.1088/1361-6501/aac55b
    [22]
    K. Genovese and D. Sorgente,“A morphing-based scheme for large deformation analysis with stereo-dic,” Optics and Lasers in Engineering, vol. 104, pp. 159-172, 2018.
    [23]
    Z. Hu, H. Xie, J. Lu, H. Wang, and J. Zhu,“Error evaluation technique for three-dimensional digital image correlation,” Applied Optics, vol. 50, no. 33, pp. 6239-6247, 2011. doi:10.1364/AO.50.006239
    [24]
    Z. Tang, J. Liang, Z. Xiao, and C. Guo,“Large deformation measurement scheme for 3D digital image correlation method,” Optics and Lasers in Engineering, vol. 50, no. 2, pp. 122-130, 2012. doi:10.1016/j.optlaseng.2011.09.018
    [25]
    X. Shao, X. Dai, Z. Chen, and X. He,“Real-time 3D digital image correlation method and its application in human pulse monitoring,” Applied Optics, vol. 55, no. 4, pp. 696-704, 2016. doi:10.1364/AO.55.000696
    [26]
    B. Pan, K. Li, and W. Tong,“Fast, robust and accurate digital image correlation calculation without redundant computations,” Experimental Mechanics, vol. 53, no. 7, pp. 1277-1289, 2013. doi:10.1007/s11340-013-9717-6
    [27]
    G. L. Mariottini, S. Scheggi, F. Morbidi, and D. Prattichizzo,“Planar mirrors for image-based robot localization and 3D reconstruction,” Mechatronics, vol. 22, no. 4, pp. 398-409, 2012. doi:10.1016/j.mechatronics.2011.09.004
    [28]
    W. Yin, S. Feng, T. Tao, L. Huang, S. Zhang, Q. Chen, and C. Zuo,“Calibration method for panoramic 3D shape measurement with plane mirrors,” Optics Express, vol. 27, no. 25, pp. 36538-36550, 2019. doi:10.1364/OE.27.036538
    • Relative Articles
  • Supplements (0)
  • Cited By
  • 加载中

Catalog

    通讯作者:陈斌, bchen63@163.com
    • 1.

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(5)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (538) PDF downloads(166) Cited by()
    Proportional views
    Related

    Address:5 Zhongguancun South Street, Haidian District, Beijing

    Tel:86-10-68914374

    Email:blgywb@bit.edu.cn

    Copy Right © Journal of Beijing Institute of Technology

    Supported by:Beijing Renhe Information Technology Co. Ltd

    /

    Return
    Return
      Baidu
      map