Welcome to Journal of Beijing Institute of Technology
Advance Search
Volume 19Issue 1
.
Turn off MathJax
Article Contents
Article Navigation> JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY> 2010> 19(1): 25-30
WANG Hong-yun, SHANGGUAN Wen-bin. Tensioner Vibration and Belt Slipping Behavior Investigation for Damped Serpentine Belt Drive Systems[J]. JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2010, 19(1): 25-30.
Citation: WANG Hong-yun, SHANGGUAN Wen-bin. Tensioner Vibration and Belt Slipping Behavior Investigation for Damped Serpentine Belt Drive Systems[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2010, 19(1): 25-30.
shu

Tensioner Vibration and Belt Slipping Behavior Investigation for Damped Serpentine Belt Drive Systems

  • 1.

    School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China;School of Electronic Information Engineering, Guangdong Polytechnic Normal University, Guangzhou 510665, China

  • 2.

    School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China

  • Received Date:2009-06-26
    Abstract
  • A nonlinear rotational motion model for n-pulley damped serpentine belt drive systems (SBDSs) was developed. The effects of the belt deflection along the contact arc of pulleys on the belt span tensions were considered. The methods for calculating the tensioner arm vibration and belt slipping on pulleys were introduced. The effects of belt damping on rotational vibration of tensioner arm and belt slipping on pulleys were studied. Numerical solutions for a 3-pulley SBDS indicate that the belt slipping at the steady states should be controlled to avoid belt slipping at transient states. The slip factors tend to decrease when the belt damping increases, and the possibility of the belt slipping can be controlled through adjusting the wrap angles of pulleys and the preload of the tensioner when the design parameters of SBDS remain constant.
    • FullText(HTML)
  • loading
    • References (15)
  • [1]
    Barker C R, Oliver L R, Brieg W F. Dynamic analysis of belt drive tension forces during rapid engine acceleration, SAE 910687 . :SAE, 1991.
    [2]
    Hwang S J, Perkins N C, Ulsoy A G, et al. Rotational response and slip prediction of serpentine belt drives systems[J]. Journal of Vibration and Acoustics, 1994, 116(1): 71-78.
    [3]
    Leamy M J. Influence of dry friction in the dynamic response of accessory belt drive system . Michigan: The University of Michigan, 1998.
    [4]
    Leamy M J, Perkins N C. Nonlinear periodic response of engine accessory drives with dry friction tensioners[J]. Journal of Vibration and Acoustics, 1998, 120(4): 909-916.
    [5]
    Beikmann R S, Perkins N C, Ulsoy A G. Design and analysis of automotive serpentine belt drive dystems for steady state performance[J]. ASME Journal of Mechanical Design, 1997, 119(1): 162-168.
    [6]
    Beikmann R S, Perkins N C, Ulsoy A G. Free vibration of serpentine belt drive systems[J]. Journal of Vibration and Acoustics, 1996, 118(3): 406-413.
    [7]
    Beikmann R S, Perkins N C, Ulsoy A G. Nonlinear coupled vibration response of serpentine belt drive systems[J].Journal of Vibration and Acoustics, 1996, 118(4): 567-574.
    [8]
    Zhang L, Zu J W. Modal analysis of serpentine belt drive systems[J]. Journal of Sound and Vibration, 1999, 222(2): 259-279.
    [9]
    Zhang L, Zu J W. One-to-one auto-parametric resonance in serpentine belt drive systems[J]. Journal of Sound and Vibration, 2000, 232(4): 783-806.
    [10]
    Parker R G. Efficient eigensolution, dynamic response, and eigensensitivity of serpentine belt drives[J]. Journal of Sound and Vibration, 2004, 270(1): 15-38.
    [11]
    Kong L, Parker R G. Equilibrium and belt-pulley vibration coupling in serpentine belt drives[J]. Journal of Applied Mechanics, 2003, 70(6): 739-750.
    [12]
    Kong L, Parker R G. Coupled belt-pulley vibration in serpentine drives with belt bending stiffness[J]. Journal of Applied Mechanics, 2004, 71(1): 109-119.
    [13]
    Zhu Farong, Parker R G. Influence of tensioner dry friction on the vibration of belt drives with belt bending stiffness[J]. Journal of Vibration and Acoustics, 2008, 130: 011002-1-9.
    [14]
    Kraver T C, Fan G W, Shah J J. Complex modal analysis of a flat belt pulley system with belt damping and coulomb-damped tensioner[J]. Journal of Mechanical Design, 1996, 118(2): 306-311.
    [15]
    Zhang L, Zu J W, Hou Z. Complex modal analysis of non-self-adjoint hybrid serpentine belt drive systems[J]. Journal of Vibration and Acoustics, 2001, 123(1): 150-156. (Edited by
    • Relative Articles
  • Supplements (0)
  • Cited By
  • 加载中

Catalog

    通讯作者:陈斌, bchen63@163.com
    • 1.

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (465) PDF downloads(84) Cited by()
    Proportional views
    Related

    Address:5 Zhongguancun South Street, Haidian District, Beijing

    Tel:86-10-68914374

    Email:blgywb@bit.edu.cn

    Copy Right © Journal of Beijing Institute of Technology

    Supported by:Beijing Renhe Information Technology Co. Ltd

    /

      Return
      Return
        Baidu
        map