Citation: | HUANG Hua, XI Jun-qiang, XIAO Kuan, YANG Deng-hua. Development of AMT Fault Diagnosis Technique Based on KWP2000[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2010, 19(1): 47-52. |
[1] |
Xi Junqiang, Ding Huarong, Chen Huiyan. The history and present status of ASCS and AMT and their development trend in China[J]. Automotive Engineering,2002,24(2):89-93. (in Chinese)
|
[2] |
Huang Hua, Xi Junqiang, Zhou Shengyan, et al. Research on the failure diagnosis of pneumatic AMT[J]. Transactions of Beijing Institute of Technology, 2009,29(7):587-591. (in Chinese)
|
[3] |
Equipment & Tool Institute. OBDII generic communication protocols by manufacturer . (2003-02-17) . http://www.etools.org/files/public/generic-protocols-02-17-03.htm.
|
[4] |
Yang Denghua. Research on AMT fault diagnostic equipment based on CAN-bus for heavy commercial vehicle . Beijing: Beijing Institute of Technology, 2008. (in Chinese)
|
[5] |
International Standard Organization. ISO 15765-1 Road vehicles-diagnostics on controller area networks(CAN)-part 1: general information[S]. Geneva, Switzerland: ISO Standard, 2004.
|
[6] |
International Standard Organization. ISO 15765-2 Road vehicles-diagnostics on controller area networks(CAN)-part 2: network layer services[S]. Geneva, Switzerland: ISO Standard, 2004.
|
[7] |
International Standard Organization. ISO 15765-3 Road vehicles-diagnostics on controller area networks(CAN)-part 3: implementation of unified diagnostic services(UDS on CAN)[S]. Geneva, Switzerland: ISO Standard, 2004.
|
[8] |
International Standard Organization. ISO/DIS 14230-3 keyword protocol 2000-part 3: implementation[S]. Geneva, Switzerland: ISO Standard, 1996.
|
[9] |
International Standard Organization. ISO 15031-6 Road vehicles-communication between vehicle and external equipment for emissions-related diagnostics-part 6: diagnostic trouble code definitions[S]. Geneva, Switzerland: ISO Standard, 2006. (Edited by
|