Citation: | CHEN Jin-nan, LIU Jie, CAO Ying-han, PENG Jiong. Numerical Study on the Mixing Performance of Screw Mixing Elements and Conventional Screw Elements[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2010, 19(2): 0217-223. |
[1] |
van Zuilichem D J, Kuiper E, Stolp W, et al. Mixing effects of constituting elements of mixing screws in single and twin screw extruders[J]. Poder Technology, 1999, 106: 147-159.
|
[2] |
Ishikawa T, Amano T. Flow patterns and mixing mechanisms in the screw mixing element of a co-rotating twin-screw extruder[J]. Polymer Engineering and Science, 2002, 42(5): 925-939.
|
[3] |
Padmanabhan B. Understanging the extruder processing zone: The heart of a twin screw extruder[J]. Additives and Compounding, 2008, 10(2): 30-35.
|
[4] |
Broa H, Liesenfelder U. Intermeshing co- and counter-rotating twin-screw extruders[J]. Chemical Engineering Technology, 2004, 27(3): 297-303.
|
[5] |
Scanchez B, Llado J. Surface quality of PVC fittings based on the design of the sprue[J]. Journal of Material Processing Technology, 2008, 207: 13-20.
|
[6] |
Hu D D, Chen J N. Numerical simulation of screw assembly performance of intermeshing co-rotating twin-screw extruders (Ⅱ): Mixing analysis[J]. China Plastic, 2005, 19(6): 103-109. (in Chinese)
|
[7] |
Bravo V L, Hrymak A N, Wright J D. Study of particle trajectories, residence times and flow behavior in kneading discs of intermeshing co-rotating twin-screw extruder[J]. Polymer Engineering and Science, 2004, 44(4): 779-793.
|
[8] |
Wang W, Manas-Zloczower I. Temporal distributions: The basis for the development of mixing indexes for scale-up of polymer processing equipment[J]. Polymer Engineering and Science, 2001, 41(6): 1068-1077.
|
[9] |
Abbasi B, Parsa M H. Finite element study of the energy dissipation and residual stresses in the closed elastic deformation path[J]. Polymer Engineering and Science, 2006, 68: 1013-1030.
|
[10] |
Connelly R K, Kokini J L. Examination of the mixing ability of single and twin screw mixers using 2D finite element method simulation with particle tracking[J]. Journal of Food Engineering, 2007, 79(3): 956-969.
|
[11] |
Shearer G, Tzoganakis C. Relationship between local residence time and distributive mixing in sections of a twin screw extruder[J]. Polymer Engineering and Science, 2001, 41(12): 2206-2215.
|