Citation: | LI Jie, WANG Min, WANG Zhi-yong, ZHOU Guang-ming. Transient thermo-mechanical coupling simulation of wet brake friction disk on tracked vehicle[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2011, 20(1): 71-76. |
[1] |
Xiang Changle. Tank design[M]. Beijing: Beijing Institute of Technology Press, 1994. (in Chinese)
|
[2] |
Wang Chengming, Shi Qin, Xia Guolin. Analysis of the fully coupled thermal-stress on rotating disk brakes[J]. Journal of Hefei University of Technology, 2007, 30(11): 1436-1439. (in Chinese)
|
[3] |
Zagrodzki P, Lam K B, Bahkali E A, et al. Nonlinear transient behavior of a sliding system with frictionally excited thermoelastic instability[J]. Tribology, 2001, 123:699-708.
|
[4] |
Mackin T J M, Noe S C, Ball K J, et al. Thermal craking in disc brakes[J]. Engineering Failure Analysis, 2002, 9:63-76.
|
[5] |
Kwangjin L, Barber J R. Frictionally excited thermoelastic instability in automotive disk brakes[J]. Tribology, 1993, 115:607-614.
|
[6] |
Kong Xiangqian. Application finite element technique on transfer thermology[M]. Beijing: Science Press,1986. (in Chinese)
|
[7] |
Xu Jin. Study on thermal load characteristic and experiment method of wet shifting clutch . Beijing: Beijing Institute of Technology, 2007. (in Chinese)
|
[8] |
Li Feixue, Zhang Wenming, Fang Mei. Wet multi-disc brake temperature distribution[J]. Journal of Beijing University of Science and Technology, 2001, 23(6):539-542. (in Chinese)
|
[9] |
Marklund P, Larsson R. Wet clutch friction characteristics obtained from simplified pin on disc test[J]. Tribology, 2007, 11:1-7. (Edited by
|