Citation: | CHEN Jin-nan, DAI Pan. Numerical study on mixing performance of screw elements in intermeshing counter-rotating and co-rotating twin-screw extrudes[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2011, 20(1): 129-137. |
[1] |
Zhu L, Geng X. Experimental investigation of polymer pellets melting mechanisms in corotating twin-screw extrusion[J]. Advances in Polymer Technology, 2002,21:188-200.
|
[2] |
Yoshinaga M, Katsuki S, Miyazaki M, et al. Mixing mechanism of three-tip kneading block in twin screw extruders[J]. Polymer Engineering Science, 2000,40: 168-178.
|
[3] |
Shearer G, Tzoganakis C. Relationship between local residence time and distributive mixing in sections of a twin screw extruder[J]. Polymer Engineering and Science, 2001,41: 2206-2215.
|
[4] |
Funatsu K, Kihara S, Miyazaki M. 3-D numerical analysis on the mixing performance for assemblies with filled zone of right-handed and left-handed double-flighted screws and kneading blocks in twin-screw extruders[J]. Polymer Engineering and Science, 2002,42(4): 707-723.
|
[5] |
Bravo V L, Hrymak A N, Wright J D. Study of particle trajectories, residence times and flow behavior in kneading discs of intermeshing co-rotating twin-screw extruders[J]. Polymer Engineering Science, 2004,44:779-793.
|
[6] |
Kim N, Kim H, Lee J. Numerical analysis of internal flow and mixing performance in polymer extruder II: twin screw element[J]. Korea-Australia Rheology Journal, 2006,18(3): 153-160.
|
[7] |
Yang H B, Tong Y Q, Tian M, et al. Effect of operating conditions on the mixing performance of the screw element and the kneading block in a twin-screw extruder[J]. Journal of Polymer Engineering 2007,27(3): 183-196.
|
[8] |
Barrera M A, Vega J F, Martinez-Salazar J. Three-dimensional modeling of flow curves in co-rotating twin-screw extruder elements [J]. Journal of Materials Processing Technology, 2008,97: 221-224.
|
[9] |
Zhang X, Feng L, Chen W, et al. Numerical simulation and experimental validation of mixing performance of kneading discs in a twin screw extruder[J]. Polymer Engineering Science, 2009,49:1-12.
|
[10] |
Polyflow. User’s manual[M]. Version 3.10.0. Lebanon, New Hampshire: Fluent Inc,2003.
|
[11] |
Scanchez B, Llado J. Surface quality of PVC fittings based on the design of the sprue[J]. Journal of Materials Processing Technology, 2008,207:13-20.
|
[12] |
Connelly R K, Kokini J L. Examination of the mixing ability of single and twin screw mixers using 2D finite element method simulation with particle tracking[J]. Journal of Food Engineering, 2007,79: 956-969.
|
[13] |
Ottino J M, Ranz W E, Macosko C W. A framework for description of mechanical mixing of fluids[J]. AIChE Journal,1981,27:565-577. (Edited by
|