Citation: | LIU Li-li, FAN Li-xia, DONG Xue-hua. Experimental study of the mechanical property of barrel processed by cold radial forging[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2012, 21(4): 453-459. |
[1] |
Altan T, Boulger F W, Becker J R, et al. Forging equipment, materials and practices, AD0771344 . Cincinnati, Ohio: Air Force Materials Laboratory, 1973.
|
[2] |
Lahoti G D, Altan T. Analysis and optimization of the radial forging process for manufacturing gun barrels,ADA0050294 .Columbus, Ohio: Battelle Columbus Lab,1974.
|
[3] |
Fan Lixia., Liu Lili, Liu Qingdong, et al. The numerical simulation of the precision radial forging processing of the gun barrel[J]. Acta Armamentar, 2009, 30(8):1098-1102.(in Chinese)
|
[4] |
Domblesky J P, Shivpuri R, Altan T. A review of radial forging technology including preform design for process optimization, ADA278770 . Columbus, Ohio: The Ohio State University,1994.
|
[5] |
Hussain M A, Pu L S, Vasilakis J D. Preliminary analysis of a mandrel for 105.mm gun tube forgings, ADA0728147 . Watervliet, NY: Large Caliber Weapon Systems Lab, 1979.
|
[6] |
Ghaei A, Movahhedy M R. Die design for the radial forging process using 3D FEM[J]. Journal of Materials Processing Technology, 2007, 182:534-539.
|
[7] |
Ameli A, Movahhedy M R. A parametric study on residual stresses and forging load in cold radial forging process[J]. International Journal of Advanced Manufacturing Technology, 2007, 33: 7-17.
|
[8] |
ASTM International. Standard test method for plastic strain ratio r for sheet metal: United States, E 517-00 . 1981-01-01.
|
[9] |
Pöhlandt K, Oberländer T. Concepts for the description of plastic anisotropy in cold bulk metal forming[J]. Journal of Materials Processing Technology, 1992, 34:187-194.
|
[10] |
Pöhlandt K, Lange K, Zucko M. Effects of anisotropy parameters in cold bulk metal forming[J]. Wire, 1999, 4:33-36.
|
[11] |
Han Han. Comparison of different methods for estimating anisotropy with rotational axial symmetry in bulk metal forming //Transactions of NAMRI/SME. West Lafayette: Society of Manufacturing Engineering, 2002:79-86.
|
[12] |
Chai Rongxia, Wen Limin, Xu Shuqin, et al. Testing of mechanical property of AZ31 magnesium alloy extruded tubes[J]. Light Alloy Fabrication Technology, 2006, 34(2):21-23. (in Chinese)
|
[13] |
Wang Zhongren, Yuan Shijian, Hu Lianxi. The fundamental of elasticity and plasticity[M]. 1st ed. Harbin: Harbin Institute of Technology Press, 1997:130-135. (in Chinese)
|