Welcome to Journal of Beijing Institute of Technology
Advance Search
Volume 23Issue 1
.
Turn off MathJax
Article Contents
Article Navigation> JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY> 2014> 23(1): 29-36
XING Deng-hai, CHEN Wu-yi. Improving the design of reinforcing frames by simulating the arch and peltate venation structures[J]. JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2014, 23(1): 29-36.
Citation: XING Deng-hai, CHEN Wu-yi. Improving the design of reinforcing frames by simulating the arch and peltate venation structures[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2014, 23(1): 29-36.
shu

Improving the design of reinforcing frames by simulating the arch and peltate venation structures

  • 1.

    School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China;Fly Control Department, Flight Automatic Control Research Institute, Xi'an 710065, China

  • 2.

    School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China

  • Received Date:2013-02-23
    Abstract
  • Based on the analyses on arch and peltate venation structures, the design of reinforcing frames was improved. First, distribution rules of the arch structure were summarized. According to the load condition and the structure of the frame, a mechanical model of arch structure was developed, and two solutions for the model were analyzed and compared with each other. Through the analysis, application rules of arch structure for improving the design were obtained. Then, distribution rules of peltate venation structure were summarized. By using the same method, application rules of peltate venation structure for improving the design were also obtained. Finally, mechanical problem of the frame was described, and rib arrangement of the frame was redesigned. A parameter optimization for the widths of ribs in bionic arrangement was also carried out to accomplish the improving design. Comparison between bionic and conventional reinforcing frames shows that the weight is reduced by as much as 15.3%.
    • FullText(HTML)
  • loading
    • References (16)
  • [1]
    Immarigeon J P, Holt R T, Koul A K, et al. Lightweight materials for aircraft applications [J]. Materials Characterization, 1995, 35(1): 41-67.
    [2]
    Saha U K, Mitra M, Menon S J, et al. Preliminary design analysis of a lightweight combat aircraft [J]. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2008, 222(4): 507-513.
    [3]
    Chen Lei, Jin Haibo. Research on structural optimization method for aircraft bulkhead based on the path of force transfer [J]. Advances in Aeronautical Science and Engineering, 2011, 2(2): 199-204. (in Chinese)
    [4]
    Deng Yangchen, Liu Xiaoou, Zhu Jihong. An approach to structural topology optimization about aircraft reinforced frames design [J]. Aircraft Design, 2004(4): 11-16. (in Chinese)
    [5]
    Deng Yangchen, Chen Hua, Ma Mingliang, et al. Studies of aircraft frame design based on topology optimization [J]. Structure & Environment Engineering, 2005, 32(2): 39-45. (in Chinese)
    [6]
    Bendse M P, Sigmund O. Topology optimization. Theory, Methods and Applications [M]. New York: Springer Verlag, 2003.
    [7]
    Rozvany G I N. A critical review of established methods of structural topology optimization [J]. Structural and Multidisciplinary Optimization, 2009, 37(3): 217-237.
    [8]
    Tushtev K, Murck M, Grathwohl G. On the nature of the stiffness of nacre [J]. Materials Science and Engineering C, 2008, 28(7): 1164-1172.
    [9]
    Chen P Y, Lin A Y M, Lin Y S, et al. Structure and mechanical properties of selected biological materials [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2008, 1(3): 208-226.
    [10]
    Cen Haitang, Chen Wuyi, Yu Maolin, et al. Structural bionics for reinforcing frame of fuselage and wing joint [J]. Journal of Beijing University of Aeronautics and Astronautics, 2005, 31(1): 13-16. (in Chinese)
    [11]
    Ma Jianfeng, Chen Wuyi, Zhao Ling, et al. Bionic design of aircraft reinforced frame based on structure of dragonfly wing [J]. Acta Aeronautica Et Astronautica Sinica, 2009, 30(3): 562-569. (in Chinese)
    [12]
    Xing D, Chen W, Zhao L, et al. Structural bionic design for high- speed machine tool working table based on distribution rules of leaf veins[J]. Science China Technological Sciences, 2012, 55(8): 2091-2098.
    [13]
    Jiao H, Zhang Y, Chen W. The lightweight design of low RCS pylon based on structural bionics [J]. Journal of Bionic Engineering, 2010, 7(2): 182-190.
    [14]
    Liu S, Ye W, Lou P, et al. Bionic design for column of gantry machining center to improve the static and dynamic performance [J]. Shock and Vibration, 2012, 19(4): 493-504.
    [15]
    Zou Q, Wang X, Liu X, et al. The optimization design of the rotary worktable for vertical lathe based on structural bionic method [J]. Applied Mechanics and Materials, 2012, 130-134: 2301-2305.
    [16]
    Emmelmann C, Petersen M, Kranz J, et al.Bionic lightweight design by laser additive manufacturing (LAM) for aircraft industry[C]//Ambs P, et al. Conference on the sustainable design, manufacturing, and engineering workforce education for a green future, Bellingham, 2011: 80650L-1-80650L-12.
    • Relative Articles
  • Supplements (0)
  • Cited By
  • 加载中

Catalog

    通讯作者:陈斌, bchen63@163.com
    • 1.

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (943) PDF downloads(25) Cited by()
    Proportional views
    Related

    Address:5 Zhongguancun South Street, Haidian District, Beijing

    Tel:86-10-68914374

    Email:blgywb@bit.edu.cn

    Copy Right © Journal of Beijing Institute of Technology

    Supported by:Beijing Renhe Information Technology Co. Ltd

    /

      Return
      Return
        Baidu
        map