Citation: | ZHANG Qing-shan, LU Bao-ping, YAO Peng-jun, LI Yun-zheng. Synthesis and characterization of poly/organo-montmorillonite composites[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2014, 23(4): 566-570. |
[1] |
Ning Z Y, Zhang Q S, Wu Q P, et al. Efficient synthesis of hydroxyl functioned polyesters from natural polyols and sebacic acid[J]. Chinese Chemical Letters, 2011, 22: 635-638.
|
[2] |
Kato M, Toshima K, Matsumura S. Direct enzymatic synthesis of a polyester with free pendant mercapto groups[J]. Biomacromolecules, 2009, 10: 366-373.
|
[3] |
Zhang S P, Yang J, Liu X Y, et al. Synthesis and characterization of poly(butylenes succinate-co-butylene malate): a new biodegradable copolyester bearing hydroxyl pendant groups[J]. Biomacromolecules, 2003, 4: 437-445.
|
[4] |
White J E, Earls J D, Sherman J W, et al. Step-growth polymerization of 10,11-epoxyundecanoic acid. synthesis and properties of a new hydroxy-functionalized thermoplastic polyester[J]. Polymer, 2007, 48: 3990-3998.
|
[5] |
Hsu Y G, Chiang I L, Lo J F. Properties of hybrid materials derived from hydroxy-containing linear polyester and silica through sol-gel process. I. Effect of thermal treatment[J]. Journal of Applied Polymer Science, 2000, 78: 1179-1190.
|
[6] |
Yao P J. Synthesis and performance improvement of hydroxyl polyesters with high molecular weight . Beijing: Beijing Institute of Technology, 2012. (in Chinese)
|
[7] |
Luckachan G E, Pillai C K S. Biodegradable polymers-a review on recent trends and emerging perspectives[J]. Journal of Polymers and the Environment, 2011, 19: 637-676.
|
[8] |
Bhuyan S, Sundararajan S, Sheng X, et al. Influence of crosslinking density on the tribological behavior of norbornene-based polymeric materials[J]. Wear, 2011, 270: 550-554.
|
[9] |
Takada Y, Shinbo K, Someya Y, et al. Preparation and properties of bio-based epoxy montomorillonite nanocomposites derived from polyglycerol polyglycidyl ether and epsilon-polylysine[J]. Journal of Applied Polymer Science, 2009, 113: 479-484.
|
[10] |
Li Q F, Yoon J S, Chen G X. Thermal and biodegradable properties of poly(l-lactide)/poly(epsilon-caprolactone) compounded with functionalized organoclay[J]. Journal of Polymers and the Environment, 2011, 19: 59-68.
|
[11] |
Chen G X, Yoon J S. Thermal stability of poly(L-lactide)/poly(butylene succinate)/clay nanocomposites[J]. Polymer Degradation and Stability, 2005, 88: 206-212.
|
[12] |
Kumar G S, Nanthini R. Synthesis and characterization of poly(propylene sebacate-co-propylene isophthalate)/montmorillonite clay nano-biocomposite[J]. Journal of Polymer Materials, 2010, 27: 235-247.
|
[13] |
Nakas G I, Kaynak C. Use of different alkylammonium salts in clay surface modification for epoxy-based nanocomposites[J]. Polymer Composites, 2009, 30: 357-363.
|
[14] |
Kaynak C, Nakas G I, Isitman N A. Mechanical properties, flammability and char morphology of epoxy resin/montmorillonite nanocomposites[J]. Applied Clay Science, 2009, 46: 319-324.
|
[15] |
Williams C K. Synthesis of functionalized biodegradable polyesters[J]. Chemical Society Reviews, 2007, 36: 1573-1580.
|
[16] |
Manias E, Touny A, Wu L, et al. Polypropylene/montmorillonite nanocomposites. review of the synthetic routes and materials properties[J]. Chemical of Materials, 2001, 13: 3516-3523.
|
[17] |
Mansoori Y, Roojaei K, Zamanloo M R. Polymer-clay nanocomposites: chemical grafting of polystyrene onto Cloisite 20A[J]. Chinese Journal of Polymer Science, 2012, 30: 815-823.
|
[18] |
Ray S S, Okamoto M. Polymer/layered silicate nanocomposites: a review from preparation to processing[J]. Progress in Polymer Science, 2003, 28: 1539-1641.
|
[19] |
Zheng W Y, Hai P C, Jin G, et al. A functionalizable polyester with free hydroxyl groups and tunable physiochemical and biological properties[J]. Biomaterials, 2010, 31: 3129-3138.
|