Dr Jing XIE

Beijing Institute of Technology

School of Mechatronical Engineering

Department of Engineering Mechanics

jxie@bit.edu.cn

010-68915024

ACADEMIC DEGREES

2010/09-2014/06	Ph.D., Mechanical Engineering. (ELyT Lab Ph.D. project) INSA de Lyon (France), The Graduate School of MEGA. Funded by the CSC and the AREVA – SAFRAN – INSA Lyon Chair.
2008/09-2010/07	M.Sc., Materials Science. (With distinction) Harbin Institute of Technology (China), The Graduate School of Materials Science and Engineering.
2004/09-2008/07	B.Sc., Materials Science and Engineering. Harbin Institute of Technology (China), The Materials Science Department.

ACADEMIC APPOINTMENTS

2018/11-now	Assistant Professor. State Key Laboratory of Explosion Science and Technology. Mechatronical Engineering, Beijing Institute of Technology
2016/08-2018/08	Postdoctoral Fellow. Faculty of Mechanical Engineering, Technion, Israel Institute of Technology. Supported by the Technion-Guangdong Fellowship.

PROFESSIONAL EXPERIENCE

2014/11-2016/06

Strength Analysis Engineer. Beijing Goldwind Science & Creation Wind power Equipment Co., Ltd., Research and Development Center.

RESEARCH INTERESTS

Mechanics and Materials.Numerical (FEM) modelling of material / structural behavior. Impact dynamics. Porous materials. Biomimic structures. Additive manufacturing.

PUBLICATIONS

(1)Jing Xie*, Daniel Rittel, Keren Shemtov-Yona, Furqan A. Shah, Anders Palmquist. A stochastic micro to macro mechanical model for the evolution of bone-implant interface stiffness.Acta Biomaterialia,2021, In press. (IF=8.947)

(2) Xianzhe Zhong*, Qingming Zhang*,Jing Xie, Mingze Wu, Fuqing Jiang, Yongming Yan, Zhiwei Wang. Mechanical properties and microstructure of the Al0.3CoCrFeNiTi0.3 high entropy alloy under dynamic compression.Materials Science and Engineering: A, 2021, 812:141147. (IF=5.234)

(3) Qing Lu, Ki-Young Song*, Yue Feng,Jing Xie.Fabrication of suspended uniform polymer microfibers by FDM 3D printing.CIRP Journal of Manufacturing Science and Technology, 2021,32:179-187. (IF=3.602)

(4) Lulu Niu,Jing Xie*, Pengwan Chen*, Guangyong Li, Xuetong Zhang. Quasi-static compression properties of graphene aerogel.Diamond and Related Materials, 2021,111:108225 (IF=3.315)

(5)Jing Xie*， Pengwan Chen， Daniel Rittel. Finite element modeling of multiple water droplets impact onto a rough surface: Re-assessing Sa and surface wavelength.Journal of the Mechanical Behavior of Biomedical Materials,2020, 110:103816 (IF=3.902)

(6) Jianrui Feng,Jing Xie, Mingjian Zhang, Xiaowen Liu, Qiang Zhou, Rongjie Yang, and Pengwan Chen. Shock-induced consolidation of tungsten nanoparticles-a molecular dynamics approach.Journal of Applied Physics,2020, 127, 025901. (IF=2.546)

(7)Jing Xie*; Daniel Rittel; Pengwan Chen. Modeling the topographic evolution of a rough metallic surface resulting from impact of water droplets.International Journal of Engineering Science, 2019, 144: 103142. (IF=8.843)

(8) Jianrui Feng, Kaida Dai, Qiang Zhou,Jing Xie, Rongjie Yang, I A Bataev and Pengwan Chen. Formation of bonding interface in explosive welding—a molecular dynamics approach.Journal of Physics-CondensMatter, 2019, 31, 415403. (IF=2.333)

(9)Jing Xie*; Daniel Rittel; The effects of waterjet peening on a random-topography metallic implant surface,European Journal of Mechanics - A/Solids, 2018, 71: 235-244. (IF=4.22)

(10)Jing Xie*; Daniel Rittel; A two-dimensional model for metallic surface roughness resulting from pure waterjet peening,International Journal of Engineering Science, 2017, 120: 189-198. (IF=8.843)

(11)Jing Xie*; Daniel Rittel; Three-dimensional stochastic modeling of metallic surface roughness resulting from pure waterjet peening,International Journal of Engineering Science,2017, 120: 241-253. (IF=8.843)

(12)Jing Xie; Daniel Nélias*; Helene Walter-Le Berre; Kazuhiro Ogawa; Yuji Ichikawa; Simulation of the cold spray particle deposition process,Journal of Tribology, 2015, 137: 041101-15. (IF=2.045)

(13) Daniel Nélias*,Jing Xie, Helene Walter-Le Berre; Kazuhiro Ogawa; Yuji Ichikawa; Simulation of the Cold Spray Deposition Process for Aluminum and Copper using Lagrangian, ALE and CEL Methods.Thermomechanical Industrial Processes(ed J.-M. Bergheau), John Wiley & Sons, Inc., Hoboken, USA. 2014: 321-358.

CONFERENCES

(1) Lulu Niu,Jing Xie, Guangyong Li, Xuetong Zhang and Pengwan Chen; The compression mechanical properties of graphene aerogel. 13^thInternational Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading. Madrid, Spain. 2021.09.20-24.

(2)Jing Xie, Daniel Rittel, Keren Shemtov-Yona, Furqan A. Shah, Anders Palmquist; Modeling the spatio-temporal evolution of bone-implant interface stiffness via a stochastic numerical approach. International Symposium on Computer Methods in Biomechanics and Biomedical Engineering 2021. Bonn, Germany. 2021.09.07-09.

(3)Jing Xie; Modeling the topographic evolution of a rough metallic surface resulting from waterjet peening, 2019 International Workshop on Dynamic Behavior of Materials and Structures, 2019.08.30.

(4)Jing Xie; Daniel Rittel; Stochastic modeling of surface roughness resulting from pure waterjet peening, The 18th Israel Materials Engineering Conference, Dead Sea, 2018.02.06-08.

(5)Jing Xie; Nélias Daniel; Walter-Le Berre Hélène; Ogawa Kazuhiro; Ichikawa Yuji; Numerical modeling for cold sprayed particle deposition, 40^thLeeds-Lyon symposium on tribology & tribochemistry forum, Lyon, 2013.09.04-06.

(6)Jing Xie; Nélias Daniel; Walter-Le Berre Hélène; Ogawa Kazuhiro; Ichikawa Yuji; Simulation of high speed impact in the cold spray deposition process, 50th Annual Technical Meeting of the Society of Engineering Science (SES), Brown University, 2013.07.28-31.

(7)Jing Xie; Nélias Daniel; Walter-Le Berre Hélène; Ogawa Kazuhiro; Ichikawa Yuji; Numerical Simulation of the Cold Spray Deposition Process for Aluminium and Copper, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, Nante, 2012.07.02-04.